">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 112 Next »

Rotation on Non-Oval V-Grooves

Contents:

  • A Swoop is where the corners Curve Inward toward the opening on the inside/outside cut of the V-Groove.

    • If V-Groove Outside has a Swoop, Decrease the Outside Rotation.

    • If V-Groove Inside has a Swoop, Increase the Inside Rotation.

VGrooveExteriorInteriorSwoopArrows70800.png

Full Definition: Swoop on a V-Groove Definition

  • A Flare is where the corners Curve Away from the opening on the inside/outside cut of the V-Groove.

    • If V-Groove Outside has a Flare, Increase the Outside Rotation.

    • If V-Groove Inside has a Flare, Decrease the Inside Rotation.

VGrooveExteriorInteriorFlareArrows70800.png

Full Definition: Flare on V-Groove Definition

🛠️ Click the Plus or Minus button several times on the desired field, do a test cut and continue adjusting until satisfied.

  • No labels