You are viewing an old version of this page. View the current version.
Compare with Current View Page History
« Previous Version 59 Next »
If the Pen is Too Large, Decrease the Opening Adjustment.
If the Pen is Too Small, Increase the Opening Adjustment.
For Additional Information: Troubleshooting Utility for the Configurations
Select desired Cartridge Tab.
Select the desired Bevel Type from Current Bevel Type.
Edit the desired Configuration field.
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.
Click OK and do another test cut.
Continue making adjustments until the desired outcome is achieved.
