Opening Adjustment Definition
The Opening Adjustment controls the size of the Opening cut or Object applied with non-blade cartridges. If the Opening is cut Too Large, Decrease the Opening Adjustment. If the Opening is cut Too Small, Increase the Opening Adjustment. Opening Adjustment Adjusts the Size of the Object Opening Adjustment Configurations See: Opening Adjustment for Openings Configurations See: Opening Adjustment for Drops Configurations See: Opening Adjustment for Outsides Configurations See: Opening Adjustment for V-Grooves Configurations See: Opening Adjustment for Deboss Configurations See: Opening Adjustment for Pens Configurations The Opening Adjustment controls the size of the Opening cut or Object applied with non-blade cartridges. If the Opening is cut Too Large, Decrease the Opening Adjustment. If the Opening is cut Too Small, Increase the Opening Adjustment. The Opening Adjustment controls the size of the Opening cut or Object applied with non-blade cartridges. If the Drop is cut Too Large, Decrease the Opening Adjustment. If the Drop is cut Too Small, Increase the Opening Adjustment. The Opening Adjustment controls the size of the Opening cut or Object applied with non-blade cartridges. If the Outside is cut Too Large, Decrease the Opening Adjustment. If the Outside is cut Too Small, Increase the Opening Adjustment. The Opening Adjustment controls the size of the Opening cut or Object applied with non-blade cartridges. If the V-Groove is cut Too Large, Decrease the Opening Adjustment. If the V-Groove is cut Too Small, Increase the Opening Adjustment. |