">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 12 Next »

Pen Tool Cartridge: Cartridge Manual: CMC Z1, Z (9000z) and 9000

  • The pen tool cartridge holds a pen to draw designs onto matboard.

  • These drawn designs can be quite intricate.

  • There is no need to worry about bevels being too close together, curves being too tight, or angles being too sharp because the matboard is not being cut. 

Pen Tool Holder and Cartridge Hardware for CMC Z1, Z (9000z) and 9000

The Pen Cartridge is the part that holds the Pen Holder and attaches to the Head.

Define the Pen Tool in the Defaults for CMC Z1, Z (9000z) and 9000

Select this topic to see information on Defining the Pen Tool in the Defaults.

Install Pen: Set the Pen Tool Cartridge Depth Setting on the CMC Z1

Select this topic to see information on Install Pen: Set the Pen Tool Cartridge Depth Setting on the CMC Z1.

Install Pen: Set the Pen Tool Cartridge Depth Setting on the CMC Z (9000z) and 9000

Select this topic to see information on Install Pen: Set the Pen Tool Cartridge Depth Setting on the CMC Z (9000z) and 9000.

Selecting the Pen Cartridge in the Software: Designing Pen Elements for CMC Z1, Z (9000z) and 9000

Select this topic to see information on Selecting the Pen Cartridge in the Software: Designing Pen Elements.

Air Pressure for Drawing with the Pen Tool Cartridge for CMC Z1, Z (9000z) and 9000

Select this topic to see information on the Air Pressure for Drawing with the Pen Tool Cartridge to cut typical matboard or dense matboard material.

Changing the Pen in the Pen Tool Cartridge for CMC Z1, Z (9000z) and 9000

Select this topic to see information on Changing the Pen in the Pen Tool Cartridge.

Changing to the Pen Tool Cartridge for CMC Z1, Z (9000z) and 9000

Select this topic to see information on Changing to the Pen Tool Cartridge.

Editing Pen Tool Cartridge Configurations for CMC Z1, Z (9000z) and 9000  

Select this topic to see information on Editing Pen Tool Cartridge Configurations.

  • No labels