Editing the Configurations

Cartridges Involved

This Configuration element involves the following Cartridges.

Note: Not all cartridges are available for all CMC models.

Editing the Configurations
Use the Configurations Screen to make adjustments to either how the CMC cuts or how it applies the non-bladed cartridges. Below is a list of support documentation for the Configurations Screen of the FrameShop software. Select which approach you want to take in identifying the cutting issue and resolving it by editing the Configurations.
Select the Configurations Cartridge Type to Edit Select this topic for information on the Cartridge Type Tabs.
Bevel Type Select this topic for information on the Bevel Types available from the Bevel Type dropdown control.
Select the Configurations Section to Edit Select this topic for information on the Configurations Section you want to edit.
Select the Configurations Field to Edit Select this topic for information on the specific Configuration Fields.
Troubleshooting Select this topic for information on the Troubleshooting utility to quickly edit the configurations for a single object.
Quick Calibration Select this topic to see information about the Quick Calibration which walks through making sure the opening is the right size, cut in the right place, as well as adjust the backups and overcuts and correct for swoops and flares.