This FrameShop Online Help System is for an older Version of FrameShop.+">This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Next »

Blade Depth Button

Use the Blade Depth button to open the Blade Depth screen where the user can select the blade depth for the current design.

Blade Depth

Click the Blade Depth Button to open the Blade Depth screen which allows the user to set the blade depth for the current design.

Blade Depth Screen

Use the Blade Depth screen to select the Blade Depth for the current design.

Each time the Blade Depth Knob on the CMC is changed, the Blade Depth setting in the software must also be changed to match.

Apply New Depth to All Layers

Check the Apply New Depth to All Layers checkbox to apply the selected blade depth to all layers of the current design on the Cutting Preview Screen.  

Uncheck the Apply New Depth to All Layers checkbox to select a different blade depth for each layer. 

Opening Value

Select the desired Opening Blade Depth value*  in the Opening field.  If desired, enter notes in the Label field for future references for this particular blade depth.

*This value corresponds to the number on the Blade Depth dial.

V-Groove Value

Select the desired V-Groove Blade Depth value*  in the V-Grooves field. If desired, enter notes in the Label field for future references for this particular blade depth.

*This value corresponds to the number on the Blade Depth dial.

Set As Default

Click Set As Default button to set the current Blade Depth value as the Default Blade Depth for the associated Opening or V-Groove field.

Set the Default for the Blade Depth

The default setting for the Blade Depth can be set in the Admin > Cutting section.

This also sets the values for the preset Blade Depth Quick Select Entries.

Dense Material

This is a feature for the VPO Head; not all models have this feature.  

Click Dense Material if this is dense material and Click OK.  

When you Click Cut, the Head plunges at the home position and applies the current air pressure.  

User is prompted to adjust the head pressure to the High Setting. 

See Also: Adjusting the Air Pressure for Dense Matboard for more information.

Extra Dense Material

This is a feature for the VPO Head; not all models have this feature.  

Click Extra Dense Material if this is extra dense material and you are cutting it with the 90° Cartridge.  

Adjust the slidebar to the percentage of cutting speed and click OK. For instance, 50% is 50% of the standard cutting speed.  

When you Click Cut, the Head plunges at the home position and applies the current air pressure.  

User is prompted to adjust the head pressure to the High Setting.

See Also: Adjusting the Air Pressure for Dense Matboard and Cutting an Extra Dense Layer with the 90 Degree Cartridge for more information. 

Returning to the Editor After Changing the Blade Depth

Changing the blade depth for a layer on the Cutting Preview then returning to the Editor will reload the Default Blade Depth or the selected SKU’s blade depth when you go back to the Cutting Preview.

You will need to reselect the Blade Depth if it should be something other than the Default Blade Depth or the selected SKU’s blade depth.

  • No labels