Change to the 45 Degree Plus Cartridge

The 45°+ Black Metal Blade Cartridge* is designed to cut 45° bevels on thicker matboard, such as 8-ply matboard.

The 45°+ Blade Cartridge is labeled 45°+ on the end.

Notes:

• Your hardware may look different than the model pictured, but the process is still the same.

• The 45°+ Blade Cartridge support Blade Depths above 16.

• *Older systems may have a 45°+ Yellow Plastic Blade Cartridge. 

Push the Blade Cartridge release lever down to eject the Blade Cartridge.

Insert the new Cartridge into the Head with the Blade facing toward the Board and the notch on the back of the Cartridge facing the Head.

It should click into place.

• It can only be inserted one way.