This FrameShop Online Help System is for an older Version of FrameShop.+">This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 19 Next »

Interior Overcut

The Interior Overcut is where the cut continues into the corner before retracting the blade from the fallout of the opening, such as when cutting a French Stair. 

Interior Cuts cut into the fallout of the opening, not the matboard. 

Select the Bevel Type for the Interior Overcut to be Edited:

Interior Overcut on Openings

This is viewed from the front of the mat. Select this topic to see information on editing the Interior Overcut on Openings.

  • Normal Bevel

  • Reverse Bevel

  • Normal Bevel-Front of Mat

  • Reverse Bevel-Front of Mat

Interior Overcut on Drops

This is viewed from the front of the mat. Select this topic to see information on editing the Interior Overcut on Drops.

  • Normal Drop

  • Reverse Drop

  • Normal Drop-Front of Mat

  • Reverse Drop-Front of Mat

Interior Overcut on the Outside

This is viewed from the front of the mat. Select this topic to see information on editing the Interior Overcut on the Outside.

  • Outside

  • Outside-Front of Mat

Interior Overcut on V-Grooves 

This is viewed from the front of the mat. Select this topic to see information on editing the Interior Overcut on V-Grooves.

  • V-Grooves

  • No labels