This FrameShop Online Help System is for an older Version of FrameShop.+">This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 20 Next »

45 Degree Outside

The 45 Degree Cartridge cuts the outside with a 45° bevel.   

Select the 45 Degree Outside Bevel Type

Select the 45° Tab on the Configurations screen. 

Select the specific Outside bevel type from the Current Bevel Type dropdown control:

  • Outside

  • Outside-Front of Mat

Select the Area of Concern for the 45 Degree Outside Cut Below: 

45 Degree Outside Cuts the Wrong Depth When Using a SKU

Select this topic to adjust the Depth Bias.

45 Degree Outside Does Not Pause for Blade Change when Cutting

Select this topic to adjust the Plunge Count.

45 Degree Circle/Oval Outside Rotation Adjustments Using the Circle/Oval Rotation Utility

Select this topic to access the Circle/Oval Rotation Utility to adjust the oval rotation for different size ovals.

45 Degree Outside Exterior Backup is too Long

Select this topic to adjust the Exterior Backup.

45 Degree Outside Exterior Backup is too Short

Select this topic to adjust the Exterior Backup.

45 Degree Outside Exterior Overcut is too Long

Select this topic to adjust the Exterior Overcut.

45 Degree Outside Exterior Overcut is too Short

Select this topic to adjust the Exterior Overcut.

45 Degree Outside Interior Backup is too Long

Select this topic to adjust the Interior Backup.

45 Degree Outside Interior Backup is too Short

Select this topic to adjust the Interior Backup.

45 Degree Outside Interior Overcut is too Long

Select this topic to adjust the Interior Overcut.

45 Degree Outside Interior Overcut is too Short

Select this topic to adjust the Interior Overcut.

45 Degree Outside Cuts the Wrong Size

Select this topic to adjust the Opening Adjustment.

45 Degree Outside has a Swoop

Select this topic to adjust the Rotation.

45 Degree Outside has a Flare

Select this topic to adjust the Rotation.

45 Degree Oval Outside has a Bump

Select this topic to adjust the Oval Rotation.

45 Degree Oval Outside has a Feather

Select this topic to adjust the Oval Rotation.

Troubleshooting Button 

Use the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview. 

  • No labels