">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 16 Next »

View List Design Details

  • Click on the background.

  • Click on the View List button to open the Design Objects screen.

 View List Information

The View List button will open the Design Objects screen which will display the location, size, and layer information of all of the Circuits/Fragments on the design.

You can also select specific Circuits/Fragments from the Design Objects screen in order to edit them, such as deleting them.

 Circuits Definition

A Circuit is an enclosed, connected object such as a Rectangle or a Polygon in Trace.

 Fragments Definition

A Fragment is an object in Trace that is not enclosed, such as a series of Lines, Arcs, Curves, or if the design has been Exploded.

See: Fragment Properties in Trace

  • The Design Objects screen will open and display a listing of the current Circuits and Fragments in the design, along with the details about them.

 Circuits Definition

A Circuit is an enclosed, connected object such as a Rectangle or a Polygon in Trace.

 Fragments Definition

A Fragment is an object in Trace that is not enclosed, such as a series of Lines, Arcs, Curves, or if the design has been Exploded.

See: Fragment Properties in Trace

Circuit List

  • The Circuit List will display a List of the Circuits located on the design along with details about them.

    • Circuits are enclosed objects.

Layer

  • The Layer column displays what Layer the object is located on if it is Traced.

    • If it is not traced, the circuits reside on layer 1.

Start

  • The Start column displays the Start X/Y Coordinates of the object's start point when drawn.

  • If you clicked on the upper left and drew by dragging to the lower right, that would make the start point on the upper left corner. 

Size

  • The Size column displays the size of each object.

 Circuit Definition

A Circuit is an enclosed, connected object such as a Rectangle or a Polygon in Trace.

 Traced Definition

Tracing the Design provides the Bevel Type and other necessary information to the Vector design in order to either Cut or apply with a Non-Blade Tool on the CMC.

The Set Bevels Tab in Trace contains the tools needed to Trace the design.

See: Tracing the Design

 X Position Definition

The X Position field is used to set or display the Horizontal position of the selected object in Designer, Trace and the Cut Preview. 

 Y Position Definition

The Y Position field is used to set or display the Vertical position of the selected object in Designer, Trace and the Cut Preview. 

Select Circuits

  • Hold down the CTRL key and click on the desired Circuit listings to select them.

  • Click the Select button.

  • The Design Object screen will close and the selected objects will be selected on the Trace Editor. 

  • Edit as desired.

 Circuit Definition

A Circuit is an enclosed, connected object such as a Rectangle or a Polygon in Trace.

Fragment List

  • The Fragment List will display a List of the Fragments located on the design along with details about them. Fragments are unenclosed objects.

Layer

  • The Layer column displays what Layer the Fragment is located on if it is Traced. If it is not Traced, the fragments reside on layer 1.

Start

  • The Start column displays the Start X/Y Coordinates of the Fragment's start point when drawn. If you clicked on the upper left and drew by dragging to the lower right, that would make the start point the upper left corner. 

Size

  • The Size column displays the size of each Fragment.

 Fragment Definition

A Fragment is an object in Trace that is not enclosed, such as a series of Lines, Arcs, Curves, or if the design has been Exploded.

See: Fragment Properties in Trace

 Traced Definition

Tracing the Design provides the Bevel Type and other necessary information to the Vector design in order to either Cut or apply with a Non-Blade Tool on the CMC.

The Set Bevels Tab in Trace contains the tools needed to Trace the design.

See: Tracing the Design

 X Position Definition

The X Position field is used to set or display the Horizontal position of the selected object in Designer, Trace and the Cut Preview. 

 Y Position Definition

The Y Position field is used to set or display the Vertical position of the selected object in Designer, Trace and the Cut Preview. 

Select Fragments

  • Hold down the CTRL key and click on the desired Fragment listings to select them.

  • Click the Select button.

  • The Design Object screen will close and the selected objects will be selected on the Trace editor. 

  • Edit as desired.

 Fragment Definition

A Fragment is an object in Trace that is not enclosed, such as a series of Lines, Arcs, Curves, or if the design has been Exploded.

See: Fragment Properties in Trace

  • No labels