">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 45 Next »

Vertical Home

  • The Vertical Home defines the global Vertical placement of objects cut with the Blade Cartridges.

Contents:

 Vertical Home for Openings Definition

The Vertical Home defines the global Vertical placement of objects cut with the Blade Cartridges.

If the Opening is cut Too Far Up Vertically, Decrease the Vertical Home.

If the Opening is cut Too Far Down Vertically, Increase the Vertical Home.

See: Vertical Home for Openings Configurations

 Vertical Home for V-Grooves Definition

The Vertical Home defines the global Vertical placement of objects cut with the Blade Cartridges.

If the V-Groove is cut Too Far Up Vertically, Decrease the Vertical Home.

If the V-Groove is cut Too Far Down Vertically, Increase the Vertical Home.

See: Vertical Home for V-Grooves Configurations

 Vertical Adjustment for Non-Blade Cartridges General Definition

The Vertical Adjustment defines the global Vertical placement of objects applied with the Non-Blade Tool Cartridges.

If the Non-Blade Tool line is applied Too Far Up Vertically, Decrease the Vertical Adjustment.

If the Non-Blade Tool line is applied Too Far Down Vertically, Increase the Vertical Adjustment.

See: Vertical Adjustment for Deboss Configurations

See: Vertical Adjustment for Pen Configurations

See: Vertical Adjustment for Vinyl Configurations

VerticalHomeBackOpeningExtendedMoveDown70800.pngVGrooveVerticalMoveDown70800.pngDebossPenVertAdjMoveUp70800.png

  • No labels