How Tosectionat:[HowTo...]">Check out our new How To section at: How To...

Skip to end of banner Go to start of banner

Vertical Home

Skip to end of metadata

Created by dani.simmonds, last modified on Apr 25, 2024

Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Vertical Home

The Vertical Home defines the global Vertical placement of objects cut with the Blade Cartridges.

For Additional Information:
See Vertical Home which defines the global Vertical placement of objects cut with the Blade Cartridges.
See Vertical Home on the Troubleshooting Utility to adjust the bladed cartridges.
See Vertical Adjustment/wiki/spaces/FrameShop8x/pages/1942511519for placement adjustment of the non-blade Tools.

Contents:

Vertical Home for Openings Definition

The Vertical Home defines the global Vertical placement of objects cut with the Blade Cartridges.

If the Opening is cut Too Far Up Vertically, Decrease the Vertical Home.

If the Opening is cut Too Far Down Vertically, Increase the Vertical Home.

See: Vertical Home for Openings Configurations

Vertical Home for V-Grooves Definition

The Vertical Home defines the global Vertical placement of objects cut with the Blade Cartridges.

If the V-Groove is cut Too Far Up Vertically, Decrease the Vertical Home.

If the V-Groove is cut Too Far Down Vertically, Increase the Vertical Home.

See: Vertical Home for V-Grooves Configurations

Vertical Adjustment for Non-Blade Cartridges General Definition

The Vertical Adjustment defines the global Vertical placement of objects applied with the Non-Blade Tool Cartridges.

If the Non-Blade Tool line is applied Too Far Up Vertically, Decrease the Vertical Adjustment.

If the Non-Blade Tool line is applied Too Far Down Vertically, Increase the Vertical Adjustment.

See: Vertical Adjustment for Deboss Configurations

See: Vertical Adjustment for Pen Configurations

See: Vertical Adjustment for Vinyl Configurations

No labels