Creating a Multi-Layered Oval Inset | |
|---|---|
|  |
Design in FrameShop, Bring into PathTrace | |
|---|---|
|  |
Bring Design into Trace | |
|---|---|
|  |
| |
Break All Intersections | |
|---|---|
The Arc tool allows you to draw a three-point mathematically defined arc in the Trace software. The Arc has three points: Initial Position (called an Anchor), Middle Point (called a Handle) which can be moved to change the shape of the Arc, and Terminating Position (called an Anchor). The Convert Arc to Splines process will convert the Arcs to Splines which are easier to tangify to make cuts smoother.  See: Arc Tool in Trace See: Arc Tool Definition See: Splines Definition The Curve function allows you to draw a four-point mathematically defined Bezier/Spline Curve in the Trace software. The Bezier/Spline Curve is defined by four points: Initial Position (called an Anchor) Two Separate Middle Points (called Handles) which can be moved to alter the shape. Terminating Position (called an Anchor) Splines are easier to handle in the software than Arcs for tangification which makes the cuts smoother between arcs. The Convert Arc to Splines process will convert the Arcs to Splines for software simplification purposes. Arcs are provided for those that prefer to draw with them.  See: Arc Tool in Trace See: Arc Tool Definition See: Splines Definition The Break Tool tool is used to Bisect the Selected Segments at the point where they Intersect in the Trace software. The Break All Intersections function bisects ALL Segments in the design where they intersect in the Trace software.  |  |
Join Segments / Close Circuit | |
|---|---|
The Break Tool tool is used to Bisect the Selected Segments at the point where they Intersect in the Trace software. The Break All Intersections function bisects ALL Segments in the design where they intersect in the Trace software. The Arc tool allows you to draw a three-point mathematically defined arc in the Trace software. The Arc has three points: Initial Position (called an Anchor), Middle Point (called a Handle) which can be moved to change the shape of the Arc, and Terminating Position (called an Anchor). The Convert Arc to Splines process will convert the Arcs to Splines which are easier to tangify to make cuts smoother. See: Arc Tool in Trace See: Arc Tool Definition See: Splines Definition The Curve function allows you to draw a four-point mathematically defined Bezier/Spline Curve in the Trace software. The Bezier/Spline Curve is defined by four points: Initial Position (called an Anchor) Two Separate Middle Points (called Handles) which can be moved to alter the shape. Terminating Position (called an Anchor) Splines are easier to handle in the software than Arcs for tangification which makes the cuts smoother between arcs. The Convert Arc to Splines process will convert the Arcs to Splines for software simplification purposes. Arcs are provided for those that prefer to draw with them. See: Arc Tool in Trace See: Arc Tool Definition See: Splines Definition |  |
|  |
The Join button will connect the Selected Segments together as one object in Trace. The Auto Join Segments button will automatically join All Adjacent Segments together in Trace.  See: Join Tool Function |  |
The Join button will connect the Selected Segments together as one object in Trace. The Auto Join Segments button will automatically join All Adjacent Segments together in Trace. See: Join Tool Function |  |
The Arc tool allows you to draw a three-point mathematically defined arc in the Trace software. The Arc has three points: Initial Position (called an Anchor), Middle Point (called a Handle) which can be moved to change the shape of the Arc, and Terminating Position (called an Anchor). The Convert Arc to Splines process will convert the Arcs to Splines which are easier to tangify to make cuts smoother. See: Arc Tool in Trace See: Arc Tool Definition See: Splines Definition The Curve function allows you to draw a four-point mathematically defined Bezier/Spline Curve in the Trace software. The Bezier/Spline Curve is defined by four points: Initial Position (called an Anchor) Two Separate Middle Points (called Handles) which can be moved to alter the shape. Terminating Position (called an Anchor) Splines are easier to handle in the software than Arcs for tangification which makes the cuts smoother between arcs. The Convert Arc to Splines process will convert the Arcs to Splines for software simplification purposes. Arcs are provided for those that prefer to draw with them. See: Arc Tool in Trace See: Arc Tool Definition See: Splines Definition |  |
|  |
|  |
|  |
|  |
The Arc tool allows you to draw a three-point mathematically defined arc in the Trace software. The Arc has three points: Initial Position (called an Anchor), Middle Point (called a Handle) which can be moved to change the shape of the Arc, and Terminating Position (called an Anchor). The Convert Arc to Splines process will convert the Arcs to Splines which are easier to tangify to make cuts smoother. See: Arc Tool in Trace See: Arc Tool Definition See: Splines Definition The Curve function allows you to draw a four-point mathematically defined Bezier/Spline Curve in the Trace software. The Bezier/Spline Curve is defined by four points: Initial Position (called an Anchor) Two Separate Middle Points (called Handles) which can be moved to alter the shape. Terminating Position (called an Anchor) Splines are easier to handle in the software than Arcs for tangification which makes the cuts smoother between arcs. The Convert Arc to Splines process will convert the Arcs to Splines for software simplification purposes. Arcs are provided for those that prefer to draw with them. See: Arc Tool in Trace See: Arc Tool Definition See: Splines Definition Tracing the Design provides the Bevel Type and other necessary information to the Vector design in order to either Cut or apply with a Non-Blade Tool on the CMC. The Set Bevels Tab in Trace contains the tools needed to Trace the design.  See: Tracing the Design |  |
Tangify/Convert to Splines | |
|---|---|
The Arc tool allows you to draw a three-point mathematically defined arc in the Trace software. The Arc has three points: Initial Position (called an Anchor), Middle Point (called a Handle) which can be moved to change the shape of the Arc, and Terminating Position (called an Anchor). The Convert Arc to Splines process will convert the Arcs to Splines which are easier to tangify to make cuts smoother. See: Arc Tool in Trace See: Arc Tool Definition See: Splines Definition The Curve function allows you to draw a four-point mathematically defined Bezier/Spline Curve in the Trace software. The Bezier/Spline Curve is defined by four points: Initial Position (called an Anchor) Two Separate Middle Points (called Handles) which can be moved to alter the shape. Terminating Position (called an Anchor) Splines are easier to handle in the software than Arcs for tangification which makes the cuts smoother between arcs. The Convert Arc to Splines process will convert the Arcs to Splines for software simplification purposes. Arcs are provided for those that prefer to draw with them. See: Arc Tool in Trace See: Arc Tool Definition See: Splines Definition The Convert Arc to Splines process will convert the Arcs to Splines which are easier to tangify to make cuts smoother.  See: Arcs Definition See: Arcs Tool Function See: Splines Definition The Tangify function will smooth the connection between the Selected Arc Circuits that are below the specified Angle in the Tangify field to provide a smoother cutting transition between the arcs. The Tangify All Circuits will smooth the connection between All of the Arc Circuits that are below the specified Angle in the Tangify field to provide a smoother cutting transition between the arcs.  See: Tangify Function See: Tangify All Circuits Function See: Arc Tool in Trace See: Arc Tool Definition See: Splines Definition |   |
Remove Layers | |
|---|---|
|  |
Trace, Save, Cut | |
|---|---|
The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut. Tracing the Design provides the Bevel Type and other necessary information to the Vector design in order to either Cut or apply with a Non-Blade Tool on the CMC. The Set Bevels Tab in Trace contains the tools needed to Trace the design. See: Tracing the Design | |
Comparison | |
|---|---|
You can see how much we changed the design when you compare it to the original version. | |
 |  |