How Tosectionat:[HowTo...]">Check out our new How To section at: How To...

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 29 Next »

Cartridges Involved

This Configuration element involves the following Cartridges.

Note: Not all cartridges are available for all CMC models.

Deboss Wide Configurations

  • The Blue Deboss Wide Cartridge presses a wide stylus into the matboard to create a subtle design.

  • This is viewed from the front of the mat.

Select the Deboss Wide Cartridge Type

  • Select the Deboss Tab on the Configurations screen.  

  • Select the Wide-Blue cartridge from the Cartridge dropdown control.

  • Deboss Wide

Select the Area of Concern for Wide Deboss Below:

  • Be sure to select the Deboss Wide from the Current Bevel Type dropdown control.

Deboss-Wide is Applied to the Wrong Place Horizontally

Problem:

  • The Deboss-Wide is Applied to the Wrong Place Horizontally.

 Horizontal Adjustment Definition

The Horizontal Adjustment controls where the Deboss is placed Horizontally.

Resolution:

  • If too far left, increase the Horizontal Adjustment.

  • If too far right, decrease the Horizontal Adjustment.

  • See Horizontal Adjustment for additional information.

Deboss-Wide is Applied to the Wrong Place Vertically 

Problem:

  • The Deboss-Wide is Applied to the Wrong Place Vertically.

 Vertical Adjustment Definition

The Vertical Adjustment controls specifically where the Deboss is placed Vertically.

Resolution:

  • If too far down, increase the Vertical Adjustment.

  • If too far up, decrease the Vertical Adjustment.

  • See Vertical Adjustment for additional information.

Deboss-Wide is the Wrong Size

Problem:

  • The Deboss-Wide is the Wrong Size.

 Opening Adjustment Definition

The Opening Adjustment controls the size of the opening.

Resolution:

  • If cut too small, increase the Opening Adjustment.

  • If cut too large, decrease the Opening Adjustment.

  • See Opening Adjustment for additional information.

Deboss-Wide Applied at the Wrong Depth

Problem:

  • The Deboss-Wide is Applied at the Wrong Depth.

 Depth Setting Definition

The Depth Setting calculates the proper Blade Depth when a SKU is selected for the matboard.

Resolution:

  • Cut too shallow, increase the Depth Setting.

  • Cut too deep, decrease the Depth Setting.

  • See Depth Setting for additional information.

Deboss-Wide Cartridge Tears the Mat 

Problem:

  • Deboss-Wide Cartridge Tears the Mat.

 Corner Pause Definition

The Corner Pause controls the amount of time, in milliseconds, to pause the application of the non-blade tools in the corners to avoid tearing the mat.

Resolution:

  • Increase the Corner Pause.

  • See Corner Pause for additional information.

Deboss-Wide Lines are too Long

Problem:

  • The Deboss-Wide Lines are too Long.

 Overshoot Definition

The Overshoot controls how far past each segment the non-blade tool is applied.

Resolution:

  • Decrease the Overshoot.

  • See Overshoot for additional information.

Deboss-Wide Lines are too Short 

Problem:

  • The Deboss-Wide Lines are too Short.

 Overshoot Definition

The Overshoot controls how far past each segment the non-blade tool is applied.

Resolution:

  • Increase the Overshoot.

  • See Overshoot for additional information.

Deboss-Wide Set to Plunge Between Segments

Problem:

  • The Deboss-Wide Set to Plunge Between Segments.

 Plunge Definition

The Plunge controls whether to Plunge/Unplunge between segments of an object when applying a non-blade tool.

Resolution:

  • Select Plunge to plunge the Deboss between Segments.

  • See Plunge for additional information.

Troubleshooting Button 

  • No labels