Versions Compared

Old Version 65

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version Current

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Editing the Rotation on V-Grooves

Expand
titleOutside Rotation for V-Grooves Definition
The

Outside Rotation on

Non-Oval V-Grooves controls for Swoops and Flares in the Outside Cut of the Non-Oval

V-Grooves

. Expand
titleOutside Swoop Definition
A Swoopin a Non-Oval V-Groove is where the corners Curve Inward toward the opening on either the Outside or Inside Cut

  • If the Outside cut of the V-Groove

.The Rotation on Non-Oval V-Grooves controls for Swoopsor Flares on Non-Oval V-Grooves.If the Outside Non-Oval V-Groove cuts with A Flare in a Non-Oval V-Groove is where the corners Curve Away from the opening on either the Outside or Inside Cut
Expand
titleOutside Flare Definition

  • If the Outside cut of the V-Groove

.The Rotation on Non-Oval V-Grooves controls for Swoopsor Flares on Non-Oval V-Grooves.If the Outside Non-Oval V-Groove cuts with
expandImage Removed

V-Groove Outside has a Flare

Problem:

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF

  • Outside cut of the Non-Oval V-Groove has Flares.

Resolution:

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF
Expand
titleOutside V-Groove Cut Flare Definition

A Flare in a Non-Oval V-Groove is where the corners Curve Away from the opening on either the Outside or Inside Cut of the V-Groove.

The Rotation on Non-Oval V-Grooves controls for Swoopsor Flares on Non-Oval V-Grooves.

If the Outside Non-Oval V-Groove cuts with a Flare, Increase the Outside Rotation.

Expand
titleHow to Adjust the Outside Rotation

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image Removed

See Also: Troubleshooting Utility for Non-Oval V-Grooves

Problem:

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF

  • Outside Non-Oval V-Groove has a Swoop or Flare.

Resolution:

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF
Expand
titleOutside Rotation for V-Grooves Definition

The Outside Rotation on Non-Oval V-Grooves controls for Swoops and Flares in the Outside Cut of the Non-Oval V-Grooves.

Expand
titleOutside Swoop Definition
A Swoopin a Non-Oval V-Groove is where the corners Curve Inward toward the opening on either the Outside or Inside Cut of the V-Groove.The Rotation on Non-Oval V-Grooves controls for Swoopsor Flares on Non-Oval V-Grooves.

If the Outside Non-Oval V-Groove cuts with a Swoop, Decrease the Outside Rotation.

Expand
titleOutside Flare Definition
A Flare
Info
titleHow to Select the Bevel Type to Edit

Select desired Cartridge Tab. 

Select the desired Bevel Type from Current Bevel Type.

Edit the desired Configuration field.

Edit the Inside Rotation or Outside Rotation field, depending on which V-Groove line you are editing.

Image Removed
Expand
titleHow to Adjust the Outside Rotation

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image Removed

V-Groove Cutting Direction

Tip

First Cut of V-Groove:

  • Cuts the Interior V-Groove Line.

  • Cuts into Fallout, not the matboard.

  • Cuts Clockwise.

  • This uses the Inside Rotation.

Tip

Second Cut of V-Groove:

  • Cuts the Exterior V-Groove Line.

  • Cuts into Matboard, not the fallout.

  • Cuts Counter-Clockwise.

  • This uses the Outside Rotation.

V-Groove Outside has a Swoop

Problem:

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF

  • Outside cut of the Non-Oval V-Groove has Swoops.

Resolution:

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF
Expand
titleOutside V-Groove Cut Swoop Definition
A Swoopin a Non-Oval V-Groove is where the corners Curve Inward toward the opening on either the Outside or Inside Cut of the V-Groove.The Rotation on Non-Oval V-Grooves controls for Swoopsor Flares on Non-Oval V-Grooves.

If the Outside Non-Oval V-Groove cuts with a Swoop, Decrease the Outside Rotation.

Expand
titleHow to Adjust the Outside Rotation

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Panel
panelIconId1f9d9-200d-2642-fe0f
panelIcon:man_mage:
panelIconText🧙‍♂️
bgColor#FFFAE6

  • For Additional Information: See Troubleshooting Utility for information on adjusting for a Swoop or Flare in a Non-Oval V-Groove

is where the corners Curve Away from the opening on either the Outside or Inside Cut of the V-Groove.The Rotation on Non-Oval V-Grooves controls for Swoopsor Flares on Non-Oval V-Grooves.

If the Outside Non-Oval V-Groove cuts with a Flare, Increase the Outside Rotation.

Image Removed

  • .

Image AddedImage AddedImage Added