">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 65 Next »

Editing the Rotation on V-Grooves

 Outside Rotation for V-Grooves Definition

The Outside Rotation on Non-Oval V-Grooves controls for Swoops and Flares in the Outside Cut of the Non-Oval V-Grooves.

 Outside Swoop Definition

A Swoop in a Non-Oval V-Groove is where the corners Curve Inward toward the opening on either the Outside or Inside Cut of the V-Groove.

The Rotation on Non-Oval V-Grooves controls for Swoops or Flares on Non-Oval V-Grooves.

If the Outside Non-Oval V-Groove cuts with a Swoop, Decrease the Outside Rotation.

 Outside Flare Definition

A Flare in a Non-Oval V-Groove is where the corners Curve Away from the opening on either the Outside or Inside Cut of the V-Groove.

The Rotation on Non-Oval V-Grooves controls for Swoops or Flares on Non-Oval V-Grooves.

If the Outside Non-Oval V-Groove cuts with a Flare, Increase the Outside Rotation.

 How to Select the Bevel Type to Edit

Select desired Cartridge Tab. 

Select the desired Bevel Type from Current Bevel Type.

Edit the desired Configuration field.

Edit the Inside Rotation or Outside Rotation field, depending on which V-Groove line you are editing.

 How to Adjust the Outside Rotation

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

V-Groove Cutting Direction

First Cut of V-Groove:

  • Cuts the Interior V-Groove Line.

  • Cuts into Fallout, not the matboard.

  • Cuts Clockwise.

  • This uses the Inside Rotation.

Second Cut of V-Groove:

  • Cuts the Exterior V-Groove Line.

  • Cuts into Matboard, not the fallout.

  • Cuts Counter-Clockwise.

  • This uses the Outside Rotation.

V-Groove Outside has a Swoop

Problem:

  • Outside cut of the Non-Oval V-Groove has Swoops.

Resolution:

 Outside V-Groove Cut Swoop Definition

A Swoop in a Non-Oval V-Groove is where the corners Curve Inward toward the opening on either the Outside or Inside Cut of the V-Groove.

The Rotation on Non-Oval V-Grooves controls for Swoops or Flares on Non-Oval V-Grooves.

If the Outside Non-Oval V-Groove cuts with a Swoop, Decrease the Outside Rotation.

 How to Adjust the Outside Rotation

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

V-Groove Outside has a Flare

Problem:

  • Outside cut of the Non-Oval V-Groove has Flares.

Resolution:

 Outside V-Groove Cut Flare Definition

A Flare in a Non-Oval V-Groove is where the corners Curve Away from the opening on either the Outside or Inside Cut of the V-Groove.

The Rotation on Non-Oval V-Grooves controls for Swoops or Flares on Non-Oval V-Grooves.

If the Outside Non-Oval V-Groove cuts with a Flare, Increase the Outside Rotation.

 How to Adjust the Outside Rotation

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

See Also: Troubleshooting Utility for Non-Oval V-Grooves

Problem:

  • Outside Non-Oval V-Groove has a Swoop or Flare.

Resolution:

 Outside Rotation for V-Grooves Definition

The Outside Rotation on Non-Oval V-Grooves controls for Swoops and Flares in the Outside Cut of the Non-Oval V-Grooves.

 Outside Swoop Definition

A Swoop in a Non-Oval V-Groove is where the corners Curve Inward toward the opening on either the Outside or Inside Cut of the V-Groove.

The Rotation on Non-Oval V-Grooves controls for Swoops or Flares on Non-Oval V-Grooves.

If the Outside Non-Oval V-Groove cuts with a Swoop, Decrease the Outside Rotation.

 Outside Flare Definition

A Flare in a Non-Oval V-Groove is where the corners Curve Away from the opening on either the Outside or Inside Cut of the V-Groove.

The Rotation on Non-Oval V-Grooves controls for Swoops or Flares on Non-Oval V-Grooves.

If the Outside Non-Oval V-Groove cuts with a Flare, Increase the Outside Rotation.

  • No labels