Page Comparison

Deboss Wide

Definition Expand

title	Deboss Wide Definition

The Deboss Wide Blue cartridge stylus presses onto the surface of the matboard to create a subtle design with a Wide line.

There are three Deboss stylus sizes: Wide, Medium, Thin.

In addition to Template Shapes, you can also Deboss CutArts, LetterMats and TTFs.

Image Removed

Image RemovedSee: Add Deboss Opening Function

Configurations

For Additional Information:
See Horizontal Adjustment/wiki/spaces/FrameShop8x/pages/1942511519for placement adjustment of the non-blade Tools.
See Horizontal Home which defines the global Horizontal placement of objects cut with the Blade Cartridges.
See Horizontal Home on the Troubleshooting Utility to adjust the bladed cartridges.

Expand

title	Deboss Horizontal Adjustment Definition

The Horizontal Adjustment defines the global Horizontalplacement of objects applied with the Deboss Cartridges.

If the Deboss line is applied Too Far Left Horizontally, Increase the Horizontal Adjustment.

If the Deboss line is applied Too Far Right

Horizontally

, Decrease the Horizontal Adjustment.

Image Removed

See: Horizontal Adjustment for Deboss.

Expand

title	How to Adjust the Horizontal Adjustment

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image Removed

Deboss-Wide is Applied to the Wrong Place

Vertically If the Deboss line is applied Too Far Up Vertically, Decreasethe Vertical Adjustment.

If the Deboss line is applied Too Far Down Vertically, Increase the Vertical Adjustment.

Panel

panelIconId	1f9d9-200d-2642-fe0f
panelIcon	:man_mage:
panelIconText	🧙‍♂️
bgColor	#FFFAE6

For Additional Information:
See Vertical Adjustment/wiki/spaces/FrameShop8x/pages/1942511519for placement adjustment of the non-blade Tools.
See Vertical Home which defines the global Vertical placement of objects cut with the Blade Cartridges.
See Vertical Home on the Troubleshooting Utility to adjust the bladed cartridges.

Expand

title	Deboss Vertical Adjustment Definition

The Vertical Adjustment defines the global Vertical placement of objects applied with the Deboss Cartridges.

If the Deboss line is applied Too Far Up Vertically, Decreasethe Vertical Adjustment.If the Deboss line is applied Too Far Down

Vertically

, Increase the Vertical Adjustment.

Image Removed

See: Vertical Adjustment for Deboss.

Expand

title	How to Adjust the Vertical Adjustment

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Image Removed

Continue making adjustments until the desired outcome is achieved.

Deboss-Wide is the Wrong Size

If the Deboss is Too Large, Decrease the Opening Adjustment.
If the Deboss is Too Small, Increase the Opening Adjustment.

Panel

panelIconId	1f9d9-200d-2642-fe0f
panelIcon	:man_mage:
panelIconText	🧙‍♂️
bgColor	#FFFAE6

For Additional Information:
See Opening Adjustment for information on adjusting the object’s size.
See Troubleshooting Utility for information on adjusting the object’s size.

Expand

title	Deboss Opening Adjustment Definition

The Opening Adjustment controls the size of the Opening cut or Object applied with non-blade cartridges.

If the Deboss is Too Large, Decrease the Opening Adjustment.

If the Deboss is Too Small, Increase the Opening Adjustment.

Image Removed

See: Opening Adjustment for Deboss.

Expand

title	How to Adjust the Opening Adjustment

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image Removed

Deboss-Wide Applied at the Wrong

Depth

If the Non-Blade Tool is too Deep, Decrease the Depth Setting.
If the Non-Blade Tool is too Shallow, Increase the Depth Setting.

Panel

panelIconId	1f9d9-200d-2642-fe0f
panelIcon	:man_mage:
panelIconText	🧙‍♂️
bgColor	#FFFAE6

For Additional Information: See Depth Setting for information on adjusting the Depth of the Non-Blade Tool.

Expand

title	Deboss Depth Setting Definition

The Depth Setting controls the Blade Depth for theNon-Blade Tools in the Configurations.

If the Non-Blade Tool is too Deep, Decrease the Depth Setting.

If the Non-Blade Tool is too Shallow, Increase the Depth Setting.

Image RemovedSee:

Depth

Setting for Deboss.

Image Removed

Deboss-Wide Cartridge Tears the Mat

The Non-Blade Tool Tears the Corners, Increase the Corner Pause.
The Non-Blade Tool is pausing too long in the Corners, Decrease the Corner Pause.

Panel

panelIconId	1f9d9-200d-2642-fe0f
panelIcon	:man_mage:
panelIconText	🧙‍♂️
bgColor	#FFFAE6

For Additional Information: See Corner Pause for information on adjusting the Pause of the Non-Blade Tool in the corners.

Expand

title	Deboss Corner Pause Definition

The Corner Pause setting in Configurations is the amount of time, in milliseconds, to pause the application of the Non-Blade Tools between segments.

The Non-Blade Tool Tears the Corners, Increase the Corner Pause.

The Non-Blade Tool is pausing too long in the Corners, Decrease the Corner Pause.

Image Removed

See: Corner Pause for Deboss

Image Removed

Deboss-Wide Lines are too

Long

If the Overshoot of the Non-Blade Tool is applied Too Long, Decrease the Overshoot.

Panel

panelIconId	1f9d9-200d-2642-fe0f
panelIcon	:man_mage:
panelIconText	🧙‍♂️
bgColor	#FFFAE6

For Additional Information: See Overshoot for information on adjusting the Overshoot of the Non-Blade Tool in the corners.

Expand

title	Deboss Overshoot Definition

The Overshoot controls how far past the end of the Line/Arc Segment to apply the Non-Blade Tool(Deboss, Pen or Vinyl).If the Overshoot of the Non-Blade Tool is applied Too

Long

, Decrease the Overshoot.

If the Overshoot of the Non-Blade Tool is applied Too Short, Increase the Overshoot.

This is similar to the Overcut used with the Blade cartridges.

Image Removed

See: Overshoot for Deboss.

Expand

title	How to Adjust the Overshoot

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image Removed

Deboss-Wide Lines are too Short

If the Overshoot of the Non-Blade Tool is applied Too Short, Increase the Overshoot.

Panel

panelIconId	1f9d9-200d-2642-fe0f
panelIcon	:man_mage:
panelIconText	🧙‍♂️
bgColor	#FFFAE6

For Additional Information: See Overshoot for information on adjusting the Overshoot of the Non-Blade Tool in the corners.

Deboss Wide Definition

Expand

title	Deboss

Overshoot

Use the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview.

Panel

panelIconId	1f9d9-200d-2642-fe0f
panelIcon	:man_mage:
panelIconText	🧙‍♂️
bgColor	#FFFAE6

For Additional Information:
See Troubleshooting Utility.
See Oval Rotation for adjusting for a Feather or a Bump in an Oval.
See Circle/Oval Rotation Utility to adjust for a Feather or Bump in an Oval.
See Rotation for adjusting for a Swoop or Flare in a Non-Oval.
See Horizontal Home which defines the global Horizontal placement of objects cut with the Blade Cartridges.
See Vertical Home which defines the global Vertical placement of objects cut with the Blade Cartridges.
See Opening Adjustment for information on adjusting the object’s size.

Expand

title	Troubleshooting Button Definition

The Troubleshooting Utility allows you to bring in a single opening and automatically selects the correct Cartridge tab and Bevel Type to configure.

Image Removed

Wide Definition

The

Overshoot controls how far past the end of the Line/Arc Segment to apply the Non-Blade Tool(Deboss, Pen or Vinyl).

If the Overshoot of the Non-Blade Tool is applied Too Long, Decrease the Overshoot.

If the Overshoot of the Non-Blade Tool is applied Too Short, Increase the Overshoot.

This is similar to the Overcut used with the Blade cartridges.

Image Removed

See: Overshoot for Deboss.

Expand

title	How to Adjust the Overshoot

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image Removed

Deboss-Wide Set to Plunge Between Segments

The Non-Blade Tool leaves a Dot where it plunges, unselect Plunge.
The Non-Blade Tool takes Too Long to apply, select Plunge.

Panel

panelIconId	1f9d9-200d-2642-fe0f
panelIcon	:man_mage:
panelIconText	🧙‍♂️
bgColor	#FFFAE6

For Additional Information: See Plunge (Tool Specific) for information on adjusting the Plunging of the Non-Blade Tool in the corners.

Expand

title	Deboss Plunge Definition

The Plunge function controls whether to Plunge/Unplunge between the Line/Arc Segments of an object when applying a Non-Blade Tool.

The Non-Blade Tool leaves a Dot where it plunges, select Unplunge.

The Non-Blade Tool takes Too Long to apply, select Plunge.

This is different from the Plunge Count which controls the number of Blade Plunges for each Blade Cartridge before pausing for a Blade Change.

Image Removed

See: Plunge for Deboss.

Image Removed

Troubleshooting Button

Deboss Wide Blue cartridge stylus presses onto the surface of the matboard to create a subtle design with a Wide line.

There are three Deboss stylus sizes: Wide, Medium, Thin.

In addition to Template Shapes, you can also Deboss CutArts, LetterMats and TTFs.

Image Added

See: Add Deboss Opening Function

Versions Compared

Old Version 57

New Version 61

Key

Deboss Wide

Configurations

Contents:

Deboss Wide Definition

Deboss-Wide Set to Plunge Between Segments

Troubleshooting Button