Versions Compared

Old Version 53

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version Current

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Deboss Wide

Definition
Expand
titleDeboss Wide Definition

The Deboss Wide Blue cartridge stylus presses onto the surface of the matboard to create a subtle design with a Wide line.

There are three Deboss stylus sizes: Wide, Medium, Thin.

In addition to Template Shapes, you can also Deboss CutArts, LetterMats and TTFs.

Image RemovedImage Removed

See: Add Deboss Opening Function

Deboss

Configurations

Contents:

Horizontally
Panel
panelIconId1f9d9-200d-2642-fe0f
panelIcon:man_mage:
panelIconText🧙‍♂️
bgColor#FFFAE6
Expand
titleDeboss Horizontal Adjustment Definition
The Horizontal Adjustment defines the global Horizontalplacement of objects applied with the Deboss Cartridges.

If the Deboss line is applied Too Far Left Horizontally, Increase the Horizontal Adjustment.

If the Deboss line is applied Too Far Right
, Decrease the Horizontal Adjustment.Image RemovedImage Removed

See: Horizontal Adjustment for
.
Expand
titleHow to Adjust the Horizontal Adjustment

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image RemovedImage RemovedDeboss
 

If the
line is applied Too Far Up Vertically, Decreasethe Vertical Adjustment.

  • If the Deboss line is applied Too Far Down Vertically, Increase the Vertical Adjustment.

    • PanelpanelIconId1f9d9
    200d-2642-fe0fpanelIcon:man_mage:panelIconText🧙‍♂️bgColor#FFFAE6 Expand
    titleDeboss Vertical Adjustment Definition

    The Vertical Adjustment defines the global Vertical placement of objects applied with the Deboss Cartridges.

    If the Deboss line is applied Too Far Up Vertically, Decreasethe Vertical Adjustment.

    If the Deboss line is applied Too Far Down Vertically, Increase the Vertical Adjustment.

    Image RemovedImage Removed

    See: Vertical Adjustment for Deboss.

    Expand
    titleHow to Adjust the Vertical Adjustment

    When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

    Click OK and do another test cut.

    Continue making adjustments until the desired outcome is achieved.

    Image RemovedImage RemovedDeboss-

  • If the Deboss is Too Large, Decrease the Opening Adjustment.

    • If the
    is Too Small, Increase the Opening Adjustment. PanelpanelIconId1f9d9
    200d-2642-fe0fpanelIcon:man_mage:panelIconText🧙‍♂️bgColor#FFFAE6
    Expand
    titleDeboss Opening Adjustment Definition

    The Opening Adjustment controls the size of the Opening cut or Object applied with non-blade cartridges.

    If the Deboss is Too Large, Decrease the Opening Adjustment.

    If the Deboss is Too Small, Increase the Opening Adjustment.

    Image RemovedImage Removed

    See: Opening Adjustment for Deboss.

    Expand
    titleHow to Adjust the Opening Adjustment

    When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

    Click OK and do another test cut.

    Continue making adjustments until the desired outcome is achieved.

    Image RemovedImage RemovedDeboss-
    Depth
    Panel
    panelIconId1f9d9-200d-2642-fe0f
    panelIcon:man_mage:
    panelIconText🧙‍♂️
    bgColor#FFFAE6

    • For Additional Information: See Depth Setting for information on adjusting the Depth of the Non-Blade Tool.

    Expand
    titleDeboss Depth Setting Definition
    The Depth Setting controls the Blade Depth for theNon-Blade Tools in the Configurations.

    If the Non-Blade Tool is too Deep, Decrease the Depth Setting.

    If the Non-Blade Tool is too Shallow, Increase the
    Setting.Image Removed

    See: Depth Setting for
    .Image RemovedDeboss
     

    • The Non-Blade Tool Tears the Corners, Increase the Corner Pause. 

    • The Non-Blade Tool is pausing too long in the Corners, Decrease the Corner Pause. 

    Panel
    panelIconId1f9d9-200d-2642-fe0f
    panelIcon:man_mage:
    panelIconText🧙‍♂️
    bgColor#FFFAE6

    • For Additional Information: See Corner Pause for information on adjusting the Pause of the Non-Blade Tool in the corners.

    expand

    title
    Corner Pause DefinitionThe Corner Pause setting in Configurations is the amount of time, in milliseconds, to pause the application of the Non
    Blade Tools between segments.

    The Non-Blade Tool Tears the Corners, Increase the Corner Pause. 

    The Non-Blade Tool is pausing too long in the Corners, Decrease the Corner Pause. 

    Image Removed

    See: Corner Pause for Deboss

    Image Removed

    Deboss-

    Long

    • If the Overshoot of the Non-Blade Tool is applied Too Long, Decrease the Overshoot.

    Panel
    panelIconId1f9d9-200d-2642-fe0f
    panelIcon:man_mage:
    panelIconText🧙‍♂️
    bgColor#FFFAE6

    • For Additional Information: See Overshoot for information on adjusting the Overshoot of the Non-Blade Tool in the corners.

    Expand
    titleDeboss Overshoot Definition
    The Overshoot controls how far past the end of the Line/Arc Segment to apply the Non-Blade Tool(Deboss, Pen or Vinyl).If the Overshoot of the Non-Blade Tool is applied Too
    , Decrease the Overshoot.If the Overshoot of the Non-Blade Tool is applied Too Short, Increase the Overshoot.See: Overshoot for

    This is similar to the Overcut used with the Blade cartridges.

    Image RemovedImage Removed
    .
    Expand
    titleHow to Adjust the Overshoot

    When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

    Click OK and do another test cut.

    Continue making adjustments until the desired outcome is achieved.

    Image RemovedImage RemovedDeboss
      Expandtitle

    • If the Overshoot of the Non-Blade Tool is applied Too Short, Increase the Overshoot.

    Panel
    panelIconId1f9d9-200d-2642-fe0f
    panelIcon:man_mage:
    panelIconText🧙‍♂️
    bgColor#FFFAE6

    • For Additional Information: See Overshoot for information on adjusting the Overshoot of the Non-Blade Tool in the corners.

    Overshoot DefinitionThe Overshoot controls how far past the end of the Line/Arc Segment to apply the Non-Blade Tool(Deboss, Pen or Vinyl).If the Overshoot of the Non
    Blade Tool is applied Too Long, Decrease the Overshoot.

    If the Overshoot of the Non-Blade Tool is applied Too Short, Increase the Overshoot.

    This is similar to the Overcut used with the Blade cartridges.

    Image RemovedImage Removed

    See: Overshoot for Deboss.

    Expand
    titleHow to Adjust the Overshoot

    When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

    Click OK and do another test cut.

    Continue making adjustments until the desired outcome is achieved.

    Image RemovedImage RemovedDeboss-

    Troubleshooting Button 

    Panel
    panelIconId1f9d9-200d-2642-fe0f
    panelIcon:man_mage:
    panelIconText🧙‍♂️
    bgColor#FFFAE6
    Expand
    titleTroubleshooting Button Definition

    The Troubleshooting Utility allows you to bring in a single opening and automatically selects the correct Cartridge tab and Bevel Type to configure.

    Image Removed
    Image Removed

    • The Non-Blade Tool leaves a Dot where it plunges, select Unplunge.

    • The Non-Blade Tool takes Too Long to apply, select Plunge.

    Panel
    panelIconId1f9d9-200d-2642-fe0f
    panelIcon:man_mage:
    panelIconText🧙‍♂️
    bgColor#FFFAE6

    • For Additional Information: See Plunge (Tool Specific) for information on adjusting the Plunging of the Non-Blade Tool in the corners.

    Expand
    titleDeboss Plunge Definition

    The Plunge function controls whether to Plunge/Unplunge between the Line/Arc Segments of an object when applying a Non-Blade Tool.

    The Non-Blade Tool leaves a Dot where it plunges, select Unplunge.

    The Non-Blade Tool takes Too Long to apply, select Plunge.

    This is different from the Plunge Count which controls the number of Blade Plunges for each Blade Cartridge before pausing for a Blade Change.

    Image Removed

    See: Plunge for Deboss.

    Image RemovedImage Removed

    Insert excerpt
    Deboss Cartridge
    Deboss Cartridge
    nameDeboss Cartridge