Versions Compared

Old Version 45

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 46

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Deboss Thin

Definition
Expand
titleDeboss Thin Definition

The Deboss Thin White cartridge stylus presses onto the surface of the matboard to create a subtle design with a Thin line.

There are three Deboss stylus sizes: Wide, Medium, Thin.

In addition to Template Shapes, you can also Deboss CutArts, LetterMats and TTFs.

Image RemovedImage Removed

See: Add Deboss Opening Function

Deboss

Configurations

Contents:

Horizontally If the Deboss line is applied Too Far Left
, Increase the Horizontal Adjustment.

If the
line is applied Too Far Right Horizontally, Decrease the Horizontal Adjustment. PanelpanelIconId1f9d9-200d-2642
fe0fpanelIcon:man_mage:panelIconText🧙‍♂️bgColor#FFFAE6 Expand
titleDeboss Horizontal Adjustment Definition
The Horizontal Adjustment defines the global Horizontalplacement of objects applied with the Deboss Cartridges.

If the Deboss line is applied Too Far Left Horizontally, Increase the Horizontal Adjustment.

If the Deboss line is applied Too Far Right Horizontally, Decrease the Horizontal Adjustment.

Image RemovedImage Removed

See: Horizontal Adjustment for Deboss.

Expand
titleHow to Adjust the Horizontal Adjustment

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image RemovedImage RemovedDeboss-
 If the Deboss line is applied Too Far Up Vertically, Decreasethe Vertical Adjustment.

If the
line is applied Too Far Down Vertically, Increase the Vertical Adjustment. Panel
panelIconId1f9d9-200d-2642-fe0f
panelIcon:man_mage:
panelIconText🧙‍♂️
bgColor#FFFAE6

  • For Additional Information:

    • See Vertical Adjustment/wiki/spaces/FrameShop8x/pages/1942511519for placement adjustment of the non
    blade Tools.

  • See Vertical Home which defines the global Vertical placement of objects cut with the Blade Cartridges.

  • See Vertical Home on the Troubleshooting Utility to adjust the bladed cartridges.

    • Expand
    titleDeboss Vertical Adjustment Definition

    The Vertical Adjustment defines the global Vertical placement of objects applied with the Deboss Cartridges.

    If the Deboss line is applied Too Far Up Vertically, Decreasethe Vertical Adjustment.

    If the Deboss line is applied Too Far Down Vertically, Increase the Vertical Adjustment.

    Image RemovedImage Removed

    See: Vertical Adjustment for Deboss.

    Expand
    titleHow to Adjust the Vertical Adjustment

    When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

    Click OK and do another test cut.

    Continue making adjustments until the desired outcome is achieved.

    Image RemovedImage RemovedDeboss-
    Panel
    panelIconId1f9d9-200d-2642-fe0f
    panelIcon:man_mage:
    panelIconText🧙‍♂️
    bgColor#FFFAE6
    Expand
    titleDeboss Opening Adjustment Definition

    The Opening Adjustment controls the size of the Opening cut or Object applied with non-blade cartridges.

    If the Deboss is Too Large, Decrease the Opening Adjustment.

    If the Deboss is Too Small, Increase the Opening Adjustment.

    Image RemovedImage Removed

    See: Opening Adjustment for Deboss.

    Expand
    titleHow to Adjust the Opening Adjustment

    When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

    Click OK and do another test cut.

    Continue making adjustments until the desired outcome is achieved.

    Image RemovedImage Removed
    Depth
    Panel
    panelIconId1f9d9-200d-2642-fe0f
    panelIcon:man_mage:
    panelIconText🧙‍♂️
    bgColor#FFFAE6

    • For Additional Information: See Depth Setting for information on adjusting the Depth of the Non-Blade Tool.

    Expand
    titleDeboss Depth Setting Definition
    The Depth Setting controls the Blade Depth for theNon-Blade Tools in the Configurations.

    If the Non-Blade Tool is too Deep, Decrease the Depth Setting.

    If the Non-Blade Tool is too Shallow, Increase the Depth Setting.

    DepthSettingDebossThin70800.jpgImage RemovedSee:
    Setting for Deboss.DepthSettingDebossThin70800.jpgImage Removed
     

    • The Non-Blade Tool Tears the Corners, Increase the Corner Pause. 

    • The Non-Blade Tool is pausing too long in the Corners, Decrease the Corner Pause. 

    PanelpanelIconId

    1f9d9-200d-2642-fe0fpanelIcon:man_mage:panelIconText🧙‍♂️bgColor#FFFAE6

    • For Additional Information: See Corner Pause for information on adjusting the Pause of the Non-Blade Tool in the corners.

    Expand
    titleDeboss Corner Pause Definition

    The Corner Pause setting in Configurations is the amount of time, in milliseconds, to pause the application of the Non-Blade Tools between segments.

    The Non-Blade Tool Tears the Corners, Increase the Corner Pause. 

    The Non-Blade Tool is pausing too long in the Corners, Decrease the Corner Pause. 

    Image RemovedImage Removed

    See: Corner Pause for Deboss

    Image RemovedImage Removed
    Long

    • If the Overshoot of the Non-Blade Tool is applied Too Long, Decrease the Overshoot.

    Panel
    panelIconId1f9d9-200d-2642-fe0f
    panelIcon:man_mage:
    panelIconText🧙‍♂️
    bgColor#FFFAE6

    • For Additional Information: See Overshoot for information on adjusting the Overshoot of the Non-Blade Tool in the corners.

    Expand
    titleDeboss Overshoot Definition
    The Overshoot controls how far past the end of the Line/Arc Segment to apply the Non-Blade Tool(Deboss, Pen or Vinyl).If the Overshoot of the Non-Blade Tool is applied Too
    , Decrease the Overshoot.

    If the Overshoot of the Non-Blade Tool is applied Too Short, Increase the Overshoot.

    This is similar to the Overcut used with the Blade cartridges.

    Image RemovedImage Removed

    See: Overshoot for Deboss.

    Expand
    titleHow to Adjust the Overshoot

    When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

    Click OK and do another test cut.

    Continue making adjustments until the desired outcome is achieved.

    Image RemovedImage Removed
     

    • If the Overshoot of the Non-Blade Tool is applied Too Short, Increase the Overshoot.

    Panel
    panelIconId1f9d9-200d-2642-fe0f
    panelIcon:man_mage:
    panelIconText🧙‍♂️
    bgColor#FFFAE6

    • For Additional Information: See Overshoot for information on adjusting the Overshoot of the Non-Blade Tool in the corners.

    Deboss Thin Definition

    Expand
    titleDeboss
    Overshoot
    Thin Definition

    The

    Overshoot controls how far past the end of the Line/Arc Segment to apply the Non-Blade Tool(Deboss, Pen or Vinyl).

    If the Overshoot of the Non-Blade Tool is applied Too Long, Decrease the Overshoot.

    If the Overshoot of the Non-Blade Tool is applied Too Short, Increase the Overshoot.

    This is similar to the Overcut used with the Blade cartridges.

    Image RemovedImage Removed

    See: Overshoot for Deboss.

    Expand
    titleHow to Adjust the Overshoot

    When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

    Click OK and do another test cut.

    Continue making adjustments until the desired outcome is achieved.

    Image RemovedImage Removed

    Deboss-Thin Set to Plunge Between Segments

    • The Non-Blade Tool leaves a Dot where it plunges, unselect Plunge.

    • The Non-Blade Tool takes Too Long to apply, select Plunge.

    Panel
    panelIconId1f9d9-200d-2642-fe0f
    panelIcon:man_mage:
    panelIconText🧙‍♂️
    bgColor#FFFAE6

    • For Additional Information: See Plunge (Tool Specific) for information on adjusting the Plunging of the Non-Blade Tool in the corners.

    Expand
    titleDeboss Plunge Definition

    The Plunge function controls whether to Plunge/Unplunge between the Line/Arc Segments of an object when applying a Non-Blade Tool.

    The Non-Blade Tool leaves a Dot where it plunges, select Unplunge.

    The Non-Blade Tool takes Too Long to apply, select Plunge.

    This is different from the Plunge Count which controls the number of Blade Plunges for each Blade Cartridge before pausing for a Blade Change

    Deboss Thin White cartridge stylus presses onto the surface of the matboard to create a subtle design with a Thin line.

    There are three Deboss stylus sizes: Wide, Medium, Thin.

    In addition to Template Shapes, you can also Deboss CutArts, LetterMats and TTFs.

    Image ModifiedImage Modified

    See:

    Plunge for Deboss.Image RemovedImage Removed

    Troubleshooting Button 

    Panel
    panelIconId1f9d9-200d-2642-fe0f
    panelIcon:man_mage:
    panelIconText🧙‍♂️
    bgColor#FFFAE6
    Expand
    titleTroubleshooting Button Definition

    The Troubleshooting Utility allows you to bring in a single opening and automatically selects the correct Cartridge tab and Bevel Type to configure.

    Image Removed
    Image Removed

    Add Deboss Opening Function