Versions Compared

Old Version 43

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version Current

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Vinyl Cartridge

Definition Expand
titleVinyl Cartridge Definition

The Vinyl Cartridge uses a special blade to cut the Vinyl which has been temporarily adhered to matboard to create the design.

Image RemovedImage Removed

Configurations

Contents:

Horizontally
Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF
Expand
titleVinyl Horizontal Adjustment Definition
The Horizontal Adjustment defines the global Horizontalplacement of objects applied with the Vinyl Cartridges.

If the Vinyl line is applied Too Far Left Horizontally, Increase the Horizontal Adjustment.

If the Vinyl line is applied Too Far Right
, Decrease the Horizontal Adjustment.Image RemovedImage Removed

See: Horizontal Adjustment for Vinyl.

Expand
titleHow to Adjust the Horizontal Adjustment

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image RemovedImage Removed
Vertically Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF
If the Vinyl line is applied Too Far Up Vertically, Decreasethe Vertical Adjustment.

  • If the Vinyl line is applied Too Far Down Vertically, Increase the Vertical Adjustment.

    • Expand
    titleVinyl Vertical Adjustment Definition

    The Vertical Adjustment defines the global Vertical placement of objects applied with the Vinyl Cartridges.

    If the Vinyl line is applied Too Far Up
    , Decreasethe Vertical Adjustment.

    If the
    line
    applied Too Far Down Vertically, Increase the Vertical Adjustment.Image RemovedImage Removed

    See: Vertical Adjustment for Vinyl.

    Expand
    titleHow to Adjust the Vertical Adjustment

    When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

    Click OK and do another test cut.

    Continue making adjustments until the desired outcome is achieved.

    Image RemovedImage RemovedVinyl is
    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF
    Expand
    titleVinyl Opening Adjustment Definition

    The Opening Adjustment controls the size of the Opening cut or Object applied with non-blade cartridges.

    If the Vinyl is cut Too Large, Decrease the Opening Adjustment.

    If the
    is cut Too Small, Increase the Opening Adjustment.Image RemovedImage Removed

    See: Opening Adjustment for Vinyls.

    Expand
    titleHow to Adjust the Opening Adjustment

    When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

    Click OK and do another test cut.

    Continue making adjustments until the desired outcome is achieved.

    Image RemovedImage RemovedVinyl
    Depth Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF
    If the Non-Blade Tool is too Deep, Decrease the
    Setting.title

  • If the Non-Blade Tool is too Shallow, Increase the Depth Setting.

    • Expand
    Depth Setting DefinitionThe Depth Setting controls the Blade Depth for theNon-Blade Tools in the Configurations.

    If the Non-Blade Tool is too Deep, Decrease the Depth Setting.

    If the Non-Blade Tool is too Shallow, Increase the Depth Setting.

    Image Removed

    See: Depth Setting for Vinyl.

    Image RemovedVinyl
    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF

    • The Non-Blade Tool Tears the Corners, Increase the Corner Pause. 

    • The Non-Blade Tool is pausing too long in the Corners, Decrease the Corner Pause. 

    Expand
    titleVinyl Corner Pause Definition

    The Corner Pause setting in Configurations is the amount of time, in milliseconds, to pause the application of the Non-Blade Tools between segments.

    The Non-Blade Tool Tears the Corners, Increase the Corner Pause. 

    The Non-Blade Tool is pausing too long in the Corners, Decrease the Corner Pause. 

    Image RemovedImage Removed

    See: Corner Pause for Vinyl

    Image RemovedImage Removed
    Long
    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF

    • If the Overshoot of the Non-Blade Tool is applied Too Long, Decrease the Overshoot.

    Expand
    titleVinyl Overshoot Definition
    The Overshoot controls how far past the end of the Line/Arc Segment to apply the Non-Blade Tool(Deboss, Pen or Vinyl).If the Overshoot of the Non-Blade Tool is applied Too
    , Decrease the Overshoot.

    This is similar to the Overcut used with the Blade cartridges.

    Image RemovedImage Removed

    See: Overshoot for Vinyl.

    Expand
    titleHow to Adjust the Overshoot

    When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

    Click OK and do another test cut.

    Continue making adjustments until the desired outcome is achieved.

    Image RemovedImage Removed
    Short Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF
    If the Overshoot of the Non-Blade Tool is applied Too
    , Increase the Overshoot.title

    Expand
    Overshoot DefinitionThe Overshoot controls how far past the end of the Line/Arc Segment to apply the Non-Blade Tool(Deboss, Pen or Vinyl).

    If the Overshoot of the Non-Blade Tool is applied Too Short, Increase the Overshoot.

    This is similar to the Overcut used with the Blade cartridges.

    Image RemovedImage Removed

    See: Overshoot for Vinyl.

    Expand
    titleHow to Adjust the Overshoot

    When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

    Click OK and do another test cut.

    Continue making adjustments until the desired outcome is achieved.

    Image RemovedImage RemovedVinyl

    Troubleshooting Button

    Info

    • Select this topic to see information on the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview.

    Expand
    titleTroubleshooting Button Definition

    The Troubleshooting Utility allows you to bring in a single opening and automatically selects the correct Cartridge tab and Bevel Type to configure.

    Image Removed
    Image Removed
    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF

    • The Non-Blade Tool leaves a Dot where it plunges, select Unplunge.

    • The Non-Blade Tool takes Too Long to apply, select Plunge.

    Expand
    titleVinyl Plunge Definition

    The Plunge function controls whether to Plunge/Unplunge between the Line/Arc Segments of an object when applying a Non-Blade Tool.

    The Non-Blade Tool leaves a Dot where it plunges, select Unplunge.

    The Non-Blade Tool takes Too Long to apply, select Plunge.

    This is different from the Plunge Count which controls the number of Blade Plunges for each Blade Cartridge before pausing for a Blade Change.

    Image RemovedImage Removed

    See: Plunge for Vinyl.

    Image RemovedImage Removed
    Insert excerpt
    Vinyl Cartridge
    Vinyl Cartridge
    nameVinyl Cartridge