Definition Expand |
---|
title | Deboss Thin Definition |
---|
| The Deboss Thin White cartridge stylus presses onto the surface of the matboard to create a subtle design with a Thin line. There are three Deboss stylus sizes: Wide, Medium, Thin. In addition to Template Shapes, you can also Deboss CutArts, LetterMats and TTFs. Image RemovedImage RemovedSee: Add Deboss Opening Function |
|
Deboss Horizontally Panel |
---|
panelIconId | atlassian-note |
---|
panelIcon | :note: |
---|
bgColor | #B3F5FF |
---|
|
|
Expand |
---|
title | Deboss Horizontal Adjustment Definition |
---|
|
The Horizontal Adjustment defines the global Horizontalplacement of objects applied with the Deboss Cartridges.If the Deboss line is applied Too Far Left , Increase the Horizontal Adjustment.If the line is applied Too Far Right Horizontally, Decrease the Horizontal Adjustment.Image RemovedImage RemovedSee: Horizontal Adjustment for Deboss.
Expand |
---|
title | How to Adjust the Horizontal Adjustment |
---|
|
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
Image RemovedImage Removed | Deboss Vertically Panel |
---|
panelIconId | atlassian-note |
---|
panelIcon | :note: |
---|
bgColor | #B3F5FF |
---|
|
If the Deboss line is applied Too Far Up Vertically, Decreasethe Vertical Adjustment.If the Deboss line is applied Too Far Down Vertically, Increase the Vertical Adjustment.
Expand |
---|
title | Deboss Vertical Adjustment Definition |
---|
|
The Vertical Adjustment defines the global Vertical placement of objects applied with the Deboss Cartridges.
If the Deboss line is applied Too Far Up , Decreasethe Vertical Adjustment.If the line is applied Too Far Down Vertically, Increase the Vertical Adjustment.Image RemovedImage RemovedSee: Vertical Adjustment for Deboss.
Expand |
---|
title | How to Adjust the Vertical Adjustment |
---|
|
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
Image RemovedImage Removed | Deboss Panel |
---|
panelIconId | atlassian-note |
---|
panelIcon | :note: |
---|
bgColor | #B3F5FF |
---|
|
|
Expand |
---|
title | Deboss Opening Adjustment Definition |
---|
|
The Opening Adjustment controls the size of the Opening cut or Object applied with non-blade cartridges. If the Deboss is Too Large, Decrease the Opening Adjustment. If the Deboss is Too Small, Increase the Opening Adjustment. Image RemovedImage RemovedSee: Opening Adjustment for Deboss. |
Expand |
---|
title | How to Adjust the Opening Adjustment |
---|
|
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.Image RemovedImage Removed | Click OK and do another test cut.
Continue making adjustments until the desired outcome is achieved.
Depth Panel |
---|
panelIconId | atlassian-note |
---|
panelIcon | :note: |
---|
bgColor | #B3F5FF |
---|
|
|
Expand |
---|
title | Deboss Depth Setting Definition |
---|
|
The Depth Setting controls the Blade Depth for theNon-Blade Tools in the Configurations.If the Non-Blade Tool is too Deep, Decrease the Depth Setting.
If the Non-Blade Tool is too Shallow, Increase the Depth Setting.
Image RemovedSee: Setting for Deboss.Image Removed Panel |
---|
panelIconId | atlassian-note |
---|
panelIcon | :note: |
---|
bgColor | #B3F5FF |
---|
| The Non-Blade Tool Tears the Corners, Increase the Corner Pause. The Non-Blade Tool is pausing too long in the Corners, Decrease the Corner Pause.
|
Expand |
---|
title | Deboss Corner Pause Definition |
---|
| The Corner Pause setting in Configurations is the amount of time, in milliseconds, to pause the application of the Non-Blade Tools between segments. The Non-Blade Tool Tears the Corners, Increase the Corner Pause. The Non-Blade Tool is pausing too long in the Corners, Decrease the Corner Pause. Image RemovedImage RemovedSee: Corner Pause for Deboss |
| Image RemovedImage Removed |
Long Panel |
---|
panelIconId | atlassian-note |
---|
panelIcon | :note: |
---|
bgColor | #B3F5FF |
---|
|
|
Expand |
---|
title | Deboss Overshoot Definition |
---|
|
The Overshoot controls how far past the end of the Line/Arc Segment to apply the Non-Blade Tool(Deboss, Pen or Vinyl).If the Overshoot of the Non-Blade Tool is applied Too , Decrease the Overshoot.If the Overshoot of the Non-Blade Tool is applied Too Short, Increase the Overshoot.
This is similar to the Overcut used with the Blade cartridges.
Image RemovedImage RemovedSee: Overshoot for Deboss.
Expand |
---|
title | How to Adjust the Overshoot |
---|
|
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.
Click OK and do another test cut.Continue making adjustments until the desired outcome is achieved.
Image RemovedImage Removed | Panel |
---|
panelIconId | atlassian-note |
---|
panelIcon | :note: |
---|
bgColor | #B3F5FF |
---|
|
|
Overshoot Expand |
---|
title | How to Adjust the Overshoot |
---|
|
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
Image RemovedImage Removed | |
---|
Panel |
---|
panelIconId | atlassian-note |
---|
panelIcon | :note: |
---|
bgColor | #B3F5FF |
---|
| The Non-Blade Tool leaves a Dot where it plunges, select Unplunge. The Non-Blade Tool takes Too Long to apply, select Plunge.
|
Expand |
---|
title | Deboss Plunge Definition |
---|
| The Plunge function controls whether to Plunge/Unplunge between the Line/Arc Segments of an object when applying a Non-Blade Tool. The Non-Blade Tool leaves a Dot where it plunges, select Unplunge. The Non-Blade Tool takes Too Long to apply, select Plunge. This is different from the Plunge Count which controls the number of Blade Plunges for each Blade Cartridge before pausing for a Blade Change. Image RemovedImage RemovedSee: Plunge for Deboss. |
| Image RemovedImage Removed |
|
---|
Expand |
---|
title | Troubleshooting Button Definition |
---|
| The Troubleshooting Utility allows you to bring in a single opening and automatically selects the correct Cartridge tab and Bevel Type to configure. Image Removed |
| Image Removed Overshoot controls how far past the end of the Line/Arc Segment to apply the Non-Blade Tool(Deboss, Pen or Vinyl).If the Overshoot of the Non-Blade Tool is applied Too Long, Decrease the Overshoot.
If the Overshoot of the Non-Blade Tool is applied Too Short, Increase the Overshoot.
This is similar to the Overcut used with the Blade cartridges.
Image RemovedImage RemovedSee: Overshoot for Deboss.
Deboss Thin White cartridge stylus presses onto the surface of the matboard to create a subtle design with a Thin line. There are three Deboss stylus sizes: Wide, Medium, Thin. In addition to Template Shapes, you can also Deboss CutArts, LetterMats and TTFs. Image AddedImage AddedSee: Add Deboss Opening Function |
|