Versions Compared

Old Version 25

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version Current

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Cartridges Involved

This Configuration element involves the following Cartridges.

Info

  • Note: Not all cartridges are available for all CMC models.

Image Removed

Pen Cartridge Configurations

Info

  • The Pen Cartridge draws onto the matboard with the selected pen.

  • This is viewed from the front of the mat.

Image Removed

Pen Tab

  • Select the Pen Tab.

  • Select the specific Pen to edit from the Cartridge dropdown control.

  • Note that each pen has its own set of configurations.

  • Below is a list of support documentation for editing the configurations of the Pen Cartridge on the Pen Tab.

Tip

  • Pens 1-9

Image Removed

Pen is Applied to the Wrong Place Horizontally 

Problem:

The

Pen Cartridge Configurations

Contents:

. Resolution:Image Removed

Expand
titleHorizontal Adjustment Definition

The Horizontal Adjustment defines the global Horizontal placement of objects applied with the Non-Blade Tool Cartridges.

 The

Problem:

Applied to
Place Vertically.

Resolution:

Expand
titleVertical Adjustment Definition

The Vertical Adjustment defines the global Vertical placement of objects applied with the Non-Blade Tool Cartridges.

Image Removed

Pen is the Wrong Size

Problem:

The Pen is the Wrong
.

Resolution:

Expand
titleOpening Adjustment Definition

The Opening Adjustment controls the size of the object cut or applied with non-blade cartridges.

Image Removed
Depth

Problem:

  • The Pen is Applied at the Wrong Depth.

Resolution:

  • The Non-Blade Tool is too Deep, Decrease the Depth Setting.

    • The Non-Blade Tool is too Shallow, Increase the
    Setting.

  • See Pen Depth Setting for additional information.

    • Expand
    titleDepth Setting Definition

    The Depth Setting controls the Blade Depth for the Non-Blade Tools in the Configurations.

    Image Removed

    Problem:

    • The Pen Cartridge Tears the Mat.

    Resolution:

    • The Non-Blade Tool is Tearing in the Corners of the segments, Increase the Corner Pause. 

    • The Non-Blade Tool is Pausing Too Long in the Corners of the segments, Decrease the Corner Pause. 

    • See Pen Corner Pause for additional information.

    ExpandtitleCorner Pause DefinitionImage Removed

    The Corner Pause setting in Configurations is the amount of time, in milliseconds, to pause the application of the Non-Blade Tools between segments.

    too Long

    Problem:

    • The Pen Lines are drawn too Long.

    Resolution:

    If the Overshoot is applied
    , Decrease the Overshoot.

  • See Pen Overshoot for additional information.

    • Expand
    titleOvershoot Definition
    The Overshoot controls how far past the end of the Line/Arc Segment to apply the Non-Blade Tool (Deboss, Pen or Vinyl).Image Removed

    This is similar to the Overcut used with the Blade cartridges.

     

    Problem:

    Problem:

    • The Pen Lines are drawn Short.

    Resolution:

    Expand
    titleOvershoot Definition

    The Overshoot controls how far past the end of the Line/Arc Segment to apply the Non-Blade Tool (Deboss, Pen or Vinyl).

    This is similar to the Overcut used with the Blade cartridges.

    Image Removed

    Set Pen to Plunge Between Pen Line Segments

    the
    Line Segments.

    Resolution:

    • The Non-Blade Tool leaves a Dot where it plunges, select Unplunge.

    • The Non-Blade Tool takes Too Long to apply, select Plunge.

    • See Plunge for additional information.

    Expand
    titlePlunge Definition
    The Plunge function controls whether to Plunge/Unplunge between the
    /Arc
    of an object when applying a Non-Blade Tool.

    Image Removed

    Set Pen Defaults

    Expand
    titleDefault Setting for Pens

    Set up the Pen Defaults in the Admin Editor section of the software.

    Image Removed

    Problem:

    • How to Calibrate Different Pens.

    Resolution:

    Expand
    titleInstall Pen Definition

    The Pen Cartridge is used to draw onto the surface of the matboard on the CMC to create a design.

    The Install Pen Utility is used to Calibrate each pen defined in the software.

    Image Removed

    Troubleshooting Button

    Info

    • Select this topic to see information on the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview.

    Expand
    titleTroubleshooting Button Definition

    The Troubleshooting Utility allows you to bring in a single opening and automatically selects the correct Cartridge tab and Bevel Type to configure.

    Image Removed
    Insert excerpt
    Pen Cartridge
    Pen Cartridge
    namePen Cartridge