Line Design Details | |
|---|---|
| |
|
The Line tool in Trace will draw a Two-Point Line.
The Line is defined by two points: Initial Position (called an Anchor) and the Terminating Position (called an Anchor).
After it is drawn, a third point in the Center will be displayed, which can be moved to alter the line into an Arc.
|  | |||
|
 |
Design Line Details | |
|---|---|
Start X and Start Y
| |
|
| Expand | ||
|---|---|---|
| ||
The Y Position field is used to set or display the Vertical position of the selected object in Designer, Trace and the Cut Preview. |
The X Position field is used to set or display the Horizontal position of the selected object in Designer, Trace and the Cut Preview.
|  | ||||
Mid X and Mid Y
|
| Expand | ||
|---|---|---|
| ||
The X Position field is used to set or display the Horizontal position of the selected object in Designer, Trace and the Cut Preview.
|
| Expand | ||
|---|---|---|
| ||
The Y Position field is used to set or display the Vertical position of the selected object in Designer, Trace and the Cut Preview.
|
 | ||
End X and End Y
|
| Expand | ||
|---|---|---|
| ||
The X Position field is used to set or display the Horizontal position of the selected object in Designer, Trace and the Cut Preview. |
| Expand | ||
|---|---|---|
| ||
The Y Position field is used to set or display the Vertical position of the selected object in Designer, Trace and the Cut Preview. |
 |
Angle
|
 |
Length
|
 |
Bevel Type
|
| Panel | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
|
| Expand | ||
|---|---|---|
| ||
The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut. |
| Expand | ||
|---|---|---|
| ||
Tracing the Design provides the Bevel Type and other necessary information to the Vector design in order to either Cut or apply with a Non-Blade Tool on the CMC. The Set Bevels Tab in Trace contains the tools needed to Trace the design. See: Tracing the Design |
|  | ||||||||
Layer
|
 |
| panelIconId | 1f9d9-200d-2642-fe0f |
|---|---|
| panelIcon | :man_mage: |
| panelIconText | 🧙♂️ |
| bgColor | #FFFAE6 |
For Additional Information: See the Layers section in the Set Bevels Tab.
| Expand | ||
|---|---|---|
| ||
Tracing the Design provides the Bevel Type and other necessary information to the Vector design in order to either Cut or apply with a Non-Blade Tool on the CMC. The Set Bevels Tab in Trace contains the tools needed to Trace the design. See: Tracing the Design |
Related Links |
|---|