Line Design Details: Trace

Line Design Details
Click on a Line to see the specific details about it. Line Tool Definition The Line tool will draw a Two-Point Line in Trace. Full Definition: Line Tool Definition
The Design Details section displays information about the selected line.

Design Line Details
Start X and Start Y Displays the Start X/Y Coordinates of the object’s start point when drawn. If you clicked on the upper left and drew by dragging to the lower right, that would make the start point the upper left corner. X and Y Position The X Position field is used to set or display the Horizontal position of the selected object. The Y Position field is used to set or display the Vertical position of the selected object. Full Definition: X and Y Position Definition
Mid X and Mid Y The Middle Point X and Y Coordinates.
End X and End Y The End Point X and Y Coordinates.
Angle This displays the Angle, in degrees, of the Line. The Angle is the space, in degrees, between a given line and an unseen horizontal line intersecting its end point.
Length Displays the Length of the Line in the current dimensions.
Bevel Type Displays the Bevel Type if the current line is Traced. Traced Tracing the Design provides the Bevel Type and other necessary information to the Vector design in order to either Cut or apply with a Non-Blade Tool on the CMC. The Set Bevels Tab in Trace contains the tools needed to Trace the design.
Layer Displays the Layer number this line is assigned to if it is Traced.