Versions Compared

Old Version 17

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version Current

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

See Trace Lesson Eleven: Starburst for the First Half of This Lesson.

To Rotate the Starburst in Trace:

Info

*See Determining the Degree of Rotation for information on how to determine the optimum degree of rotation for your particular CutArt.

Expand
titleRotate Definition

The Rotation function in Designer is the action of rotating the selected object(s) around an axis or center by the specified number of degrees.

Image Removed

See: Rotation in Designer Function

Image RemovedClick the  Expand
titleCutArt Definition

CutArt™ are simple shapes and design elements created by Wizard that can be added to designs.

CutArts can be applied to your current design and edited, such as resizing and rotating.

They can be Cut, Debossed, Penned or cut on Vinyl.

Image RemovedSee: Add CutArt Function
Insert excerpt
Rotation of Objects in Trace
Rotation of Objects in Trace
nameRotation of Objects in Trace Definition
Image Added

  • Click the Left < Rotate button.

  • The CutArt will Rotate.

Expand
titleRotate Definition

The Rotation function in Designer is the action of rotating the selected object(s) around an axis or center by the specified number of degrees.

Image Removed

See: Rotation in Designer Function

  • Turn on the Dynamic Outsides if the rotated CutArt falls outside the edges of the mat.

Image Modified

Trace, Save, Cut

 You

  •  

  • You will get a message stating that this design contains objects that do not have an assigned Bevel Type.

    • This refers to the Alignment Lines and Arcs that we didn't Trace.

  • Click Yes that you wish to continue.

 
Info

  • Since it is a Deboss design, you can also size it much smaller if desired without worrying about Overcuts and Backups

  • Optionally, you can also bring the CutArt straight to the Cut Preview from Trace.

  • The Starburst design is completed.

Expand
titleBevel Type Definition

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

Image Removed
Expand
titleTraced Definition

Tracing the Design provides the Bevel Type and other necessary information to the Vector design in order to either Cut or apply with a Non-Blade Tool on the CMC.

The Set Bevels Tab in Trace contains the tools needed to Trace the design.

Image Removed

See: Tracing the Design

Expand
titleCutArt Definition

CutArt™ are simple shapes and design elements created by Wizard that can be added to designs.

CutArts can be applied to your current design and edited, such as resizing and rotating.

They can be Cut, Debossed, Penned or cut on Vinyl.

Image Removed

See: Add CutArt Function

Expand
titleDeboss Definition

The Deboss cartridge stylus presses onto the surface of the matboard to create a subtle design.

There are three Deboss stylus sizes: Wide, Medium, Thin.

In addition to Template Shapes, you can also Deboss CutArts, LetterMats and TTFs.

Image RemovedImage Removed

See: Add Deboss Opening Function

See: Deboss Configurations

See: Deboss Thin Definition

See: Deboss Medium Definition

See: Deboss Wide Definition

Image Removed
Insert excerpt
CutArt™ Definition
CutArt™ Definition
nameCutArt Definition
Insert excerpt
Deboss Cartridge
Deboss Cartridge
nameDeboss Cartridge
Image Added

Comparison

  • You can see how much we changed the design when you compare it to what we started with.

  • You can alter the design greatly by changing the number of sides of the template, selecting a different template, changing the CutArt placed, and even the number of degrees of rotation when you place it on the Editor. 

Image RemovedImage Removed

Image AddedImage Added