Versions Compared

Old Version 16

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version Current

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
title
Panel
panelIconIdatlassian-plus1f9d9-200d-2640-fe0f
panelIcon:pluswoman_mage:
panelIconText:plus:🧙‍♀️
bgColor#FFFAE6

  • The 45°+ Cartridge cuts the bevel angle on the thicker matboard at 45°.

  • This angle can be displayed on either the front or the back of the mat or drop depending upon the selected Bevel Type.

  • The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

  • The Bevel Type determines the initial blade plunge position.

  • The Blade Depth must be above 16 in order for the CMC to prompt for the 45°+ Cartridge.

Expand

Contents:

Child pages (Children Display)
allChildrentrue
45PlusMetalBevelOpening70800.pngImage Added
Excerpt
hiddentrue
name45 Degree Plus Cartridge

...

  • The 45°+ Cartridge cuts the bevel angle on the thicker matboard at 45°.

  • This angle can be displayed on either the front or the back of the mat or drop depending upon the selected Bevel Type.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

The Bevel Type determines the initial blade plunge position.

Select [Bevel Type] or [Bevel Type]-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

...

See: 45 Degree Plus Normal Bevel Opening Definition

45PlusMetalBevelOpening70800.pngImage Added

Full Definition: 45 Degree Plus

...

Cartridge Definition

See: 45 Degree Plus Normal Bevel Drop Definition

See: 45 Degree Plus Reverse Bevel Drop Definition

See: 45 Degree Plus Outside Definition

See: 45 Degree Plus Normal Bevel Closed V-Groove Definition

See: 45 Degree Plus Normal Bevel Open V-Groove Definition

See: 45 Degree Plus Reverse Bevel Open V-Groove Definition

Expand
titleHow to Adjust the Configurations

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Contents:

Child pages (Children Display)
allChildrentrue
Image Removed