Page Comparison

Cartridges Involved

This Configuration element involves the following Cartridges.

Info
Note: Not all cartridges are available for all CMC models.

Image Removed

Pen Cartridge Configurations

The Pen Cartridge draws onto the matboard with the selected pen.

Image Removed

Pen Tab

Select this topic to see information on editing the configurations for the Pen Cartridge on the Pen Tab.
Select the specific Pen to edit from the Cartridge dropdown control.
Note that each pen has its own set of configurations.
Below is a list of support documentation for editing the configurations of the Pen Cartridge on the Pen Tab.

Image Removed

Pen is Applied to the Wrong Place Horizontally

Problem:

The

Pen Cartridge Configurations

Resolution:

Adjust the Pen Horizontal Adjustment. Select this topic to see information on editing the Pen Horizontal Adjustment.

Image Removed

Pen is Applied to the Wrong Place Vertically

The

Problem:

Pen is

Applied to

the Wrong

Place Vertically.

Resolution:

Adjust the Pen Vertical Adjustment. Select this topic to see information on editing the Pen Vertical Adjustment.

Info
This is viewed from the front of the mat.

Image RemovedPen is the Wrong The

Size

Problem:

Pen

is the Wrong Size.

Resolution:

Adjust the Pen Opening Adjustment. Select this topic to see information on editing the Pen Opening Adjustment.

Info
This is viewed from the front of the mat.

Image RemovedPen The

Applied at the Wrong Depth

Problem:

Pen

is Applied at the Wrong Depth.

Resolution:

Adjust the Pen Depth Settings. Select this topic to see information on editing the Pen Depth Setting.

Image Removed

Pen Cartridge Tears the Mat

Problem:

The Pen

Cartridge Tears the Mat

.

Resolution:

Adjust the Pen Corner Pause. Select this topic to see information on editing the Pen Corner Pause.

Image Removed InfoThe

Pen Lines are too Long

Problem:

Pen Lines are

drawn

too

Long.

Resolution:

Adjust the Pen Overshoot. Select this topic to see information on editing the Pen Overshoot.

Info
This is viewed from the front of the mat.

Image RemovedPen Lines are too

Short

Problem:

The Pen lines are drawn Short.

Resolution:

Adjust the Pen Overshoot. Select this topic to see information on editing the Pen Overshoot.

Info
This is viewed from the front of the mat.

Image Removed Info

Set Pen to Plunge Between Pen Line Segments

Problem:

Set

the

Pen to Plunge Between Pen Line Segments

.

Resolution:

InfoSelect/Unselect the Plunge checkbox. Select this topic to see information on editing the Plunge between segments.

Image Removed

Calibrating

Different Pens

Problem:

How to Calibrate

Different Pens

.

Resolution:

Use the Install Pen utility to calibrate pens. Select this topic to see information on configuring different pens with the Install Pen calibration utility.

Image Removed

Set Pen Defaults

Tip
Set up the Pen Defaults in the Admin Editor section of the software.

Image Removed

Troubleshooting Button

Info
Select this topic to see information on the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview.

Image Removed

Insert excerpt

	Pen Cartridge
	Pen Cartridge
name	Pen Cartridge

Versions Compared

Old Version 16

New Version Current

Key

Cartridges Involved

Pen Cartridge Configurations

Pen Tab

Pen is Applied to the Wrong Place Horizontally

Problem:

Pen Cartridge Configurations

Contents:

Resolution:

Problem:

Resolution:

Problem:

Resolution:

Problem:

Resolution:

Pen Cartridge Tears the Mat

Problem:

Resolution:

Problem:

Resolution:

Problem:

Resolution:

Set Pen to Plunge Between Pen Line Segments

Resolution:

Problem:

Resolution:

Set Pen Defaults