Page Comparison

Design an Unenclosed V-Groove

Info
This lesson shows how to make a free-floating unenclosed V-Groove.

Panel

panelIconId	1f9d9-200d-2640-fe0f
panelIcon	:woman_mage:
panelIconText	🧙‍♀️
bgColor	#FFEBE6

See Trace Keyboard Shortcuts.

Expand

title	V-Groove Definition

The Normal Bevel Closed V-Groove involves two symmetrical cuts: one in the matboard and a corresponding cut in the fallout, both forming a mirrored arrangement. The matboard is sliced halfway through the thickness and the core is visible from the front.

First Cut: Cuts the Interior cut into the Fallout Clockwise.

Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise.

Select V-Groove from the Current Bevel Type dropdown control to edit this configuration.

Image Modified

See: 45 Degree Closed V-Groove Configurations

See: 45 Degree Plus Closed V-Groove Configurations

See: 45 Front Closed V-Groove Configurations

See: 52 Degree Closed V-Groove Configurations

Image Removed

Image Added

Design Opening in FrameShop

First we need to make sure we are designing the layers in the correct order for these instructions.
On the FrameShop Main Page, click Admin and stay on the Defaults tab.
Under Layer Direction select Bottom Up if it is not already set to that.
Click Save and return to the Main Page.
- You can change this back to the original setting later if desired.

Panel

panelIconId

atlassian-note

1f9d9-200d-2640-fe0f
panelIcon	:

note:

bgColor
woman_mage:
panelIconText	🧙‍♀️

#B3F5FF

	#FFEBE6

Layer Direction: Bottom Up is the preferred direction.
- When you Offset an object to create another layer, that new layer will be the Top layer.
Layer Direction: Top Down is not recommended.
- When you Offset an object to create another layer, that new layer will be the Bottom layer, even though it is larger than the original object.

Image Added

Place a three layer 4 x 5 #906 Rectangle Key Template on the FrameShop Design Editor.
Click on Properties.
Click on Parameters.
Change the Distance to 1.5".

Expand

title	Template Definition

Templatesare specialized parametric shape generators created by Wizard.

Many of the templates have additional Properties that can be edited which can change the shape, curves and corners of the design as well as a wide assortment of Parameters.

The Template Library displays the different templates that are available for use.

Image Modified

See: Template Properties

See: Template Library

Expand

title	Parameters Definition

The Parameters are set of specified variable characteristics related to the selected object that can be modified through the accompanying fields in Designer.

For example, the Chamfer is the symmetrical angled surface at the corner of the Template.

In Designer, the Template Parameter Map displays a diagram describing each parameter field for the current Template.

Image Modified

PanelpanelIconIdatlassian-infopanelIcon:info:

bgColor#B3F5FF

Click on the Key tab.
Change the second layer's Key Reveal to .5” (1/2").
- This Reveal will be the distance from the Nameplate to the V-Groove.

Expand

title	Parameters Definition

The Parameters are set of specified variable characteristics related to the selected object that can be modified through the accompanying fields in Designer.

For example, the Chamfer is the symmetrical angled surface at the corner of the Template.

In Designer, the Template Parameter Map displays a diagram describing each parameter field for the current Template.

Image Modified

Expand

title	Reveal Definition

In a two-layer design, the Reveal is the amount of the bottom matboard showing under the top mat in Designer and Visualize.

The standard Reveal between the top and bottom mat is 1/4".

Image Modified

See: Designer Reveal Function

Image Modified

Place V-Groove

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Click on the Openings tab.
With the opening still selected, click the Add V-Groovebutton.
Enter 1.25" for the Distance to Offset V-Groove field.
Click OK.

Expand

title	V-Groove Definition

The Normal Bevel Closed V-Groove involves two symmetrical cuts: one in the matboard and a corresponding cut in the fallout, both forming a mirrored arrangement. The matboard is sliced halfway through the thickness and the core is visible from the front.

First Cut: Cuts the Interior cut into the Fallout Clockwise.

Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise.

Select V-Groove from the Current Bevel Type dropdown control to edit this configuration.

Image Modified

See: 45 Degree Closed V-Groove Configurations

See: 45 Degree Plus Closed V-Groove Configurations

See: 45 Front Closed V-Groove Configurations

See: 52 Degree Closed V-Groove Configurations

Expand

title	Offset Definition

The Offset button creates a displacement copy of the selected object a parallel distance away as specified in the Offset Revealfield.

Image Modified
See: Offset Function in Trace

Image Removed PanelpanelIconIdatlassian-infopanelIcon:info:bgColor#B3F5FF

Offset Rules:

Enclosed Objects:

The Left < button will offset an enclosed object to the outside.
The Right > button will offset an enclosed object to the inside.

Arcs and Curves greater than 180 Degrees use the same rules as closed objects.

Unenclosed Objects:

For unenclosed objects the arrow buttons depend on the direction of travel of the vector segments, starting from the line’s start point. The Left < button offsets Clockwise and Right > button offsets Counter-Clockwise.

If it doesn’t Offset in the expected direction, click Undo and click the other Offset Direction.

Image Added

The V-Groove is placed.

Image Removed PanelpanelIconIdatlassian-notepanelIcon:note:bgColor#B3F5FF

Image Added

Click on the V-Groove to resize it.

Image Removed PanelpanelIconIdatlassian-notepanelIcon:note:bgColor#B3F5FF

Image Added

Pull down the Bottom of the V-Groove and drag it down to the middle of the Key opening.
- Make sure you are pulling the V-Groove down and not just moving the V-Groove.
Release the mouse to place it.

Image Removed

Image Added

Bring Design into Trace

panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Bring the design into Trace via the Right-Click Menu* or from the Cut Preview Screen.
- *If you use the Right-Click method, hold down the CTRL key and select both the Opening and the V-Groove before selecting Convert to CutArt.

Expand

title	CutArt Definition

CutArt™ are simple shapes and design elements created by Wizard that can be added to designs.

CutArts can be applied to your current design and edited, such as resizing and rotating.

They can be Cut, Debossed, Penned or cut on Vinyl.

Image Modified

See: Add CutArt Function

Image Removed

Image Added

Break Intersection

PanelpanelIconId

atlassian-notepanelIcon:note:bgColor#B3F5FF

Stay on the Trace and Draw tab.
Hold down the CTRL key and click on the V-Groove and the Outside Line of the Nameplate.
Click the Break button.

Expand

title	Break Definition

The Break Tool tool is used to Bisect the Selected Segments at the point where they Intersect in the Trace software.

The Break All Intersections function bisects ALL Segments in the design where they intersect in the Trace software.

Image Modified

See: Break All Intersections Function

Image Modified

PanelpanelIconIdatlassian-info

panelIcon:info:bgColor#B3F5FF

The intersections are now Broken where the Lines crossed over each other.

Expand

title	Break Definition

The Break Tool tool is used to Bisect the Selected Segments at the point where they Intersect in the Trace software.

The Break All Intersections function bisects ALL Segments in the design where they intersect in the Trace software.

Image Modified

See: Break All Intersections Function

Expand

title	Line Definition

The Line tool in Trace will draw a Two-Point Line.

The Line is defined by two points: Initial Position (called an Anchor) and the Terminating Position (called an Anchor).

After it is drawn, a third point in the Center will be displayed, which can be moved to alter the line into an Arc.

Image Modified

See: Line Tool Function

Image Removed

Image Added

Delete Object

PanelpanelIconIdatlassian-note

panelIcon:note:bgColor#B3F5FF

Hold down the CTRL key and click on the Horizontal Line inside the Nameplate, the Outside Lines of the Nameplate, and the Outside Layer of the Opening.
Click the Delete button.

Expand

title	Line Definition

The Line tool in Trace will draw a Two-Point Line.

The Line is defined by two points: Initial Position (called an Anchor) and the Terminating Position (called an Anchor).

After it is drawn, a third point in the Center will be displayed, which can be moved to alter the line into an Arc.

Image Modified

See: Line Tool Function

Image Modified

panel

panelIconId	atlassian-info
panelIcon	:info:
bgColor	#B3F5FF

The Lines are deleted.

Expand

title	Line Definition

The Line tool in Trace will draw a Two-Point Line.

The Line is defined by two points: Initial Position (called an Anchor) and the Terminating Position (called an Anchor).

After it is drawn, a third point in the Center will be displayed, which can be moved to alter the line into an Arc.

Image Modified

See: Line Tool Function

Image Removed

Image Added

Trace the Design

Info
Because this design contains no Arcs, there is no need to Tangify it or Convert Arcs into Splines.

PanelpanelIconIdatlassian-notepanelIcon

:note:bgColor#B3F5FF

Click the Set Bevels tab.
Select the Top Layer which is displayed at the Top of the Layer List

regardless of the actual layer number.We're converting the Opening that was on this layer into a V-Groove on the other layer, so we no longer need this layer.

.
We no longer need this layer as we had deleted the opening from this layer.
We will be tracing the Free-floating V-Groove onto the next layer, which will now be the top layer.
Click the Remove button

.

to delete this unneeded layer.
Any information on this layer will be moved to the next layer.

Expand

title	Bevel Type Definition

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

Image Modified

Expand

title	Arc Definition

The Arc tool allows you to draw athree-point mathematically defined arc in the Trace software.

The Arc has three points: Initial Position (called an Anchor), Middle Point (called a Handle) which can be moved to change the shape of the Arc, and Terminating Position (called an Anchor).

The Convert Arc to Splines process will convert the Arcs to Splines which are easier to tangify to make cuts smoother.

Image Modified
See: Arc Tool in Trace
See: Arc Tool Definition
See: Splines Definition
See: Convert Arc to Splines Function

Expand

title	Tangify Definition

The Tangify function will smooth the connection between the Selected Arc Circuits that are below the specified Angle in the Tangify field to provide a smoother cutting transition between the arcs.

The Tangify All Circuits will smooth the connection between All of the ArcCircuits that are below the specified Angle in the Tangify field to provide a smoother cutting transition between the arcs.

Image Modified
See: Tangify Function
See: Tangify All Circuits Function
See: Arc Tool in Trace
See: Arc Tool Definition
See: Splines Definition
See: Convert Arc to Splines Function

Expand

title	Convert Arcs into Splines

The Convert Arc to Splines process will convert the Arcs to Splines which are easier to tangify to make cuts smoother.

Image Modified

See: Arcs Definition

See: Arcs Tool Function

See: Splines Definition

See: Splines Tool Function

See: Convert Arc to Splines Function

Image Modified

PanelpanelIconIdpanelIcon:note:bgColor#B3F5FF

atlassian-note

Remain on the new Top Layer.
Click on the new V-Groove object to select it.
Click the 45° V-Groove Set button.

Expand

title	V-Groove Definition

The Normal Bevel Closed V-Groove involves two symmetrical cuts: one in the matboard and a corresponding cut in the fallout, both forming a mirrored arrangement. The matboard is sliced halfway through the thickness and the core is visible from the front.

First Cut: Cuts the Interior cut into the Fallout Clockwise.

Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise.

Select V-Groove from the Current Bevel Type dropdown control to edit this configuration.

Image Modified

See: 45 Degree Closed V-Groove Configurations

See: 45 Degree Plus Closed V-Groove Configurations

See: 45 Front Closed V-Groove Configurations

See: 52 Degree Closed V-Groove Configurations

Image Modified

Panel

panelIconId	atlassian-info
panelIcon	:info:
bgColor	#B3F5FF

The V-Groove is Traced.

Info
NOTE: V-Groove/Pen/Deboss items do not have to be enclosed objects to be Traced.

Expand

title	V-Groove Definition

The Normal Bevel Closed V-Groove involves two symmetrical cuts: one in the matboard and a corresponding cut in the fallout, both forming a mirrored arrangement. The matboard is sliced halfway through the thickness and the core is visible from the front.

First Cut: Cuts the Interior cut into the Fallout Clockwise.

Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise.

Select V-Groove from the Current Bevel Type dropdown control to edit this configuration.

Image Modified

See: 45 Degree Closed V-Groove Configurations

See: 45 Degree Plus Closed V-Groove Configurations

See: 45 Front Closed V-Groove Configurations

See: 52 Degree Closed V-Groove Configurations

Expand

title	Traced Definition

Tracing the Design provides the Bevel Type and other necessary information to the Vector design in order to either Cut or apply with a Non-Blade Tool on the CMC.

The Set Bevels Tab in Trace contains the tools needed to Trace the design.

Image Modified

See: Tracing the Design

Image Removed

Image Added

Save and Cut

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Save the CutArt.
Load the CutArt.
Cut the CutArt.
Optionally, you can also bring the CutArt straight to the Cut Preview from Trace.

Info
The free-floating V-Groove design is completed.

Expand

title	Traced Definition

Tracing the Design provides the Bevel Type and other necessary information to the Vector design in order to either Cut or apply with a Non-Blade Tool on the CMC.

The Set Bevels Tab in Trace contains the tools needed to Trace the design.

Image Modified

See: Tracing the Design

Expand

title	CutArt Definition

CutArt™ are simple shapes and design elements created by Wizard that can be added to designs.

CutArts can be applied to your current design and edited, such as resizing and rotating.

They can be Cut, Debossed, Penned or cut on Vinyl.

Image Modified

See: Add CutArt Function

Image Removed

Image Added

Comparison
You can see how much we changed the design when you compare it to the original version.

Image Removed

Image Added

Image Removed

Image Added

Versions Compared

Old Version 15

New Version 24

Key

Design an Unenclosed V-Groove

Design Opening in FrameShop

Place V-Groove

Offset Rules:

Bring Design into Trace

Break Intersection

Delete Object

Trace the Design

Save and Cut

Comparison