Page Comparison

45 Degree Outside
The 45 Degree Cartridge cuts the outside with a 45° bevel.	Image RemovedImage Added

Select the 45 Degree Outside Bevel Type

Select the 45° Tab on the Configurations screen.

Select the specific Outside bevel type from the Current Bevel Type dropdown control:

Select the Area of Concern for the 45 Degree Outside Cut Below:

45 Degree Outside Cuts the Wrong Depth When Using a SKU
Select this topic to adjust the Depth Bias.

...

45 Degree Outside Exterior Backup is too Long
Select this topic to adjust the Exterior Backup.	Image Modified

45 Degree Outside Exterior Backup is too Short
Select this topic to adjust the Exterior Backup.	Image Modified

45 Degree Outside Exterior Overcut is too Long
Select this topic to adjust the Exterior Overcut.	Image Modified

45 Degree Outside Exterior Overcut is too Short
Select this topic to adjust the Exterior Overcut.	Image Modified

45 Degree Outside Interior Backup is too Long
Select this topic to adjust the Interior Backup.

45 Degree Outside Interior Backup is too Short
Select this topic to adjust the Interior Backup.	Image Modified

45 Degree Outside Interior Overcut is too Long
Select this topic to adjust the Interior Overcut.	Image Modified

45 Degree Outside Interior Overcut is too Short
Select this topic to adjust the Interior Overcut.	Image Modified

45 Degree Outside Cuts the Wrong Size
Select this topic to adjust the Opening Adjustment.	Image Modified

45 Degree Outside has a Swoop
Select this topic to adjust the Rotation.	Image Modified

45 Degree Outside has a Flare
Select this topic to adjust the Rotation.	Image Modified

45 Degree Oval Outside has a Bump
Select this topic to adjust the Oval Rotation.	Image Modified

45 Degree Oval Outside has a Feather
Select this topic to adjust the Oval Rotation.	Image Modified

Troubleshooting Button
Use the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview.