Page Comparison

45 Degree Plus Outside

The 45 Degree Plus Cartridge* cuts the outside with a 45° bevel on thicker matboard such as 8-ply.

*Older systems may have a yellow plastic 45°+ Cartridge.

Select the 45°+ Tab on the Configurations screen.

Select the specific Outside bevel type from the Current Bevel Type dropdown control.

Select the Area of Concern for the Outside Cut Below:

Blade Depth is Incorrect When Using a SKU
Select this topic to adjust the Depth Bias.

...

Exterior Backup is too Long
Select this topic to adjust the Exterior Backup.

Exterior Backup is too Short
Select this topic to adjust the Exterior Backup.

Exterior Overcut is too Long
Select this topic to adjust the Exterior Overcut.

Exterior Overcut is too Short
Select this topic to adjust the Exterior Overcut.

Interior Backup is too Long
Select this topic to adjust the Interior Backup.

Interior Backup is too Short
Select this topic to adjust the Interior Backup.

Interior Overcut is too Long
Select this topic to adjust the Interior Overcut.

Interior Overcut is too Short
Select this topic to adjust the Interior Overcut.

Outside Cuts the Wrong Size
Select this topic to adjust the Opening Adjustment.

Outside has a Swoop
Select this topic to adjust the Rotation.

Outside has a Flare
Select this topic to adjust the Rotation.

Oval Outside has a Bump
Select this topic to adjust the Oval Rotation.

Oval Outside has a Feather
Select this topic to adjust the Oval Rotation.

Troubleshooting Button
Use the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview.