V-Groove Properties | |
|---|---|
Use the V-Groove Properties to edit the individual proprietary adjustments available for the V-Groove objects. | |
Click on a V-Groove object. Click on the Properties Tab to edit the individual proprietary adjustments available for V-Groove objects. Optionally, Right-Click on the V-Groove and select Edit to open the V-Groove Properties. |  |
...
VG Width | |
|---|---|
VG Width on the V-Groove parameters determines if the V-Groove is a Closed or Open V-Groove. A Closed V-Groove has a VG Width of 0 (zero) and cuts from the front of the mat. Anything larger than zero for the VG Width is an Open V-Groove, which can be cut from the front or the back of the mat. |   |
Open V-Groove | |
|---|---|
Anything larger than zero for the VG Width is an Open V-Groove, which can be cut from the front or the back of the mat. Enter the desired VG Width. The V-Groove adjusts to the new width. NOTE: This is not where to adjust the closed V-Groove width if it is cutting too narrow or too wide. See Width Adjustment for adjusting the V-Groove cutting width. |   |
Distance | |
|---|---|
The Distance is the space between the V-Groove and the object the V-Groove is attached to in the Attach To field. If the V-Groove is not attached to anything, the Distance field is grayed out. NOTE: Offsetting the V-Groove from an object when initially placing the V-Groove does not automatically attach the V-Groove to that object. |   |
Changing the Distance number will offset the V-Groove the new distance from the object it is attached to. If the object is resized, the V-Groove is also resized proportionately and remains the Distance entered in the distance field from the object it is attached to. |   |
Set the Default V-Groove Distance | |
|---|---|
The default setting for the V-Groove Distance can be set in the Admin > Editor. |   |
Attach To | |
|---|---|
Click Attach To and select from the dropdown control the desired object to attach the selected V-Groove. If you resize the item that the V-Groove is attached to (opening or mat), the V-Groove is resized proportionately and remains the same distance entered in the Distance field from the object it is attached to. NOTE: Offsetting the V-Groove from an object when initially placing the V-Groove does not automatically attach the V-Groove to that object. |   |
V-Groove Attached to Opening Here the V-Groove is attached to an opening. |   |
V-Groove Attached to the Mat Here the V-Groove is attached to the mat. |   |
Cartridge Selection and Type | |
|---|---|
Use the Cartridge and Type section to select the desired Cartridge and Cartridge Type for the V-Groove. | |
Cartridge Icon Click on the Cartridge Icon and select the desired cartridge for the current V-Groove. Changing it to a non-Bevel Cartridge will change the V-Groove to that Cartridge type; i.e., changing it from a 45 Degree Cartridge to a Deboss will make it a Deboss opening. |   |
Cartridge Type When applicable, select the desired cartridge type from the Type dropdown control. Selections available are dependent upon the type of Cartridge tool selected. |  |
For instance for Deboss, the selections available are the Deboss Wide, Deboss Medium, and Deboss Thin cartridges. |   |
Template Options Parameters Tab | |
|---|---|
Edit the specific parameters for this template in the Template Options Parameters tab. | |
These attributes are directly related to the specific template selected. Edit each parameter as desired. The design changes immediately to reflect the parameter adjustments. |   |
Template Parameter Map Click on the Template Parameter Map button (displayed as [?]) on the Parameters tab. A template map will open which will describe what each parameter field adjusts for the current template. |   |