Page Comparison

Information on editing the Configurations. 

Information on the Configurations Menu items.

Information on the Cartridge Type Tabs.

Examples of the different Cartridge Types. 

Information on the Tool Configs. 

Information on the Circle/Oval Rotation Utility for Circle/Oval calibration.

Information on the User Configs section. 

Information on the bevel types on the Current Bevel Type Dropdown Control. 

Example of the Bevel Type Examples that can be cut with the bladed cartridges. 

Information on adjusting the Backups and Overcuts to control where the blade specifically plunges in and retracts from the matboard or fallout when cutting objects.

Information on adjusting the Opening Adjustment to control specifically the size of the opening.

Information on adjusting the Rotation to control specifically for Swoops and Flares in a non-oval opening.

Information on adjusting the Oval Rotation to control specifically for Feathers and Bumpsin an oval opening.

Information on editing the V-Groove width.

Information on editing the Non-Oval V-Groove for a Swoop and Flareon the outside cut of a V-Groove.

Information on editing the Non-Oval V-Groovefor a Swoop or Flare on the Inside cut of a V-Groove.

Information on editing the Oval V-Groove for a Feather or Bump on the Outside cut of an Oval V-Groove.

Information on editing the Oval V-Groove for a Feather or Bump on the Inside cut of an Oval V-Groove.

Information on editing the Horizontal placement for the Deboss, Pen or Vinyl tool.

Information on editing the Vertical placement for the Deboss, Pen or Vinyl tool.

Information on selecting the optimum Blade Depth for the Deboss, Pen or Vinyl tool.

Information on editing the amount of time to Pause in the corners when applying the Deboss, Pen or Vinyl tool.

Information on editing how much to Overshoot past the end of the segment for the Deboss, Pen or Vinyl tool.

Information on editing whether to Plunge or Unplunge between segments of an object when doing a Deboss, Pen or Vinyl object.

Information on using the Install Pen utility to calibrate the Pen Cartridge. 

Information on editing with the Troubleshooting utility to make quick edits for a single object on the Cutting Preview. 

Information on the Configuration Map to determine the external/internal backups/overcuts for the selected cartridge and bevel type.

Information on doing a Quick Calibration to make sure that the opening is the right size, cut in the right place, and adjust the backups/overcuts and correct for Swoops/Flares.

Information on the Bevel Type Cutting Direction.