Page Comparison

• For Additional Information:See Troubleshooting Utility for information on adjusting for a Feather or Bump in an Oval V-Groove.See

• Circle/Oval Rotation Utility to adjust for a Feather or Bump in an Oval V-Groove.: Configurations Screen

• Troubleshooting Utility for the Configurations

A Bump in the Outside cut of an Oval V-Groove is a Lump of material left behind where the cut started and ended on the Outside cut of the Oval V-Groove.

If the Outside cut of the Oval V-Groove cuts with a Bump, Decreasethe Outside Oval Rotation.

The Oval Rotation for V-Grooves controls for /wiki/spaces/FrameShop8x/pages/1942509662or /wiki/spaces/FrameShop8x/pages/1942511032on an Oval V-Groove.

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.