Page Comparison

• Select whether to activate Borders to snap objects to.

• For Additional Information:

• See Borders in the New Openings Screen.

• See Borders Toggle in Design.

• See Borders Properties in Design.

• See Borders in Visualize.

The Border is the area of precisely definable width between the outside edge of a Mat and the edge of the Opening(s) in the Design Editor, Nesting, and Visualization.

Image Removed

See: Border Properties

See: Border Default Settings

• Select the Positioning direction to position objects.

• For Additional Information: See Positioning Toggle in Design.

The Positioning Toggle dictates whether objects are positioned from the Top or from the Bottom Layer as indicated by the Arrow Direction, such as when placing V-Grooves or using the Guides in the Design Editor or Trace.

Image Removed

Image Removed

See: Positioning Toggle Function

• Select whether to display the New Openings Screen or to go directly to the Design Editor from the Main Screen.

  • Optionally, you can click Cancel on the New Openings Screen to go directly to the Design Editor.

• For Additional Information: See New Openings Screen.

• Select whether to Auto Label Openings with the size of the object.

  • This size label is overwritten if a new label is manually entered in the object Label field in the Properties tab.

• Select whether to Enforce Minimum Sizes for CutArt and LetterMat if cutting below the Minimum Size.

• Users may experience unsatisfactory results when cutting below the Minimum Size.

• Designs can be Debossed/Penned smaller than they can be cut.

• The Minimum Size warning is displayed when going to the Cut Preview:

  • Yes - Continue cutting without any changes

  • No - Resize content to minimums and continue cutting

  • Cancel - Abort cutting this design

Min Height displays the Minimum Height that the selected CutArt or LetterMat has been tested to cut.

The CutArt/LetterMat can be Debossed or Penned at a much smaller size than it can be cut.

Image Removed

See: CutArt Properties

See: LetterMat Properties

• Select whether to default to Cutting the Outside of the mat.

The Outside Bevel is created by cutting into the fallout surface with the blade angled at 45°/52°, thereby slanting the bevel under the fallout surface. The matboard core is not visible from the front.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

Select Outside or Outside-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

Image Removed

Image Removed

See: 45 Degree Outside Configurations

See: 45 Degree Plus Outside Configurations

See: 45 Degree Front Outside Configurations

See: 52 Degree Outside Configurations

See: 90 Degree Outside Configurations

• Select whether to show the software’s numerical values as Fractions or Decimals.

• Select whether to show the Wizard Wink Camera settings in the Visualization software.

• For Additional Information: See Color Profiles in Visualize for information on creating a color profile for the camera.

• Default Settings: See Admin > Defaults for the default settings for Loading Images.

The Visualize software allows the user to create a digitally finished product using the selected frames, matboards and the artwork.

This makes it easy to present several different variations of the design for the customer to pick from. 

Image Removed

See: Visualization