The 45°+ Cartridge cuts the bevel angle on the thicker matboard at 45°. This angle can be displayed on either the front or the back of the mat or drop depending upon the selected Bevel Type. The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut. The Bevel Type determines the initial blade plunge position. Select [Bevel Type] or [Bevel Type]-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.  Image Removed See: 45 Degree Plus Normal Bevel Opening Definition See: 45 Degree Plus Reverse Bevel Opening Definition See: 45 Degree Plus Normal Bevel Drop Definition See: 45 Degree Plus Reverse Bevel Drop Definition See: 45 Degree Plus Outside Definition See: 45 Degree Plus Normal Bevel Closed V-Groove Definition See: 45 Degree Plus Normal Bevel Open V-Groove Definition See: 45 Degree Plus Reverse Bevel Open V-Groove Definition | 