Versions Compared

Old Version 16

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 17

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Line Design Details

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF

  • Click on a Line to see the specific details about it. 

Expand
titleLine Tool Definition

The Line tool in Trace will draw a Two-Point Line. 

The Line is defined by two points: Initial Position (called an Anchor) and the Terminating Position (called an Anchor).

After it is drawn, a third point in the Center will be displayed, which can be moved to alter the line into an Arc.

Image Modified
Image Modified
PanelpanelIconIdatlassian-infopanelIcon:
Info
:
bgColor#B3F5FF

  • The Design Details section displays information about the selected line.

Image Modified

Design Line Details

Start X and Start Y

PanelpanelIconIdatlassian-infopanelIcon:info:bgColor

#B3F5FF

  • Displays the Start X/Y Coordinates of the object’s start point when drawn.

    • If you clicked on the upper left and drew by dragging to the lower right, that would make the start point the upper left corner. 

Expand
titleX Position Definition

The X Position field is used to set or display the Horizontal position of the selected object in Designer, Trace and the Cut Preview. 

Image Modified
Expand
titleY Position Definition

The Y Position field is used to set or display the Vertical position of the selected object in Designer, Trace and the Cut Preview. 

Image Modified
Image Modified

Mid X and Mid Y 

PanelpanelIconId

atlassian-
Info
panelIcon:info:bgColor#B3F5FF

  • The Middle Point X and Y Coordinates.

Expand
titleX Position Definition

The X Position field is used to set or display the Horizontal position of the selected object in Designer, Trace and the Cut Preview. 

Image Modified

 

Expand
titleY Position Definition

The Y Position field is used to set or display the Vertical position of the selected object in Designer, Trace and the Cut Preview. 

Image Modified

 

Image Modified

End X and End Y 

PanelpanelIconIdatlassian-infopanelIcon

:
Info
:bgColor#B3F5FF

  • The End Point X and Y Coordinates.

Expand
titleX Position Definition

The X Position field is used to set or display the Horizontal position of the selected object in Designer, Trace and the Cut Preview. 

Image Modified
Expand
titleY Position Definition

The Y Position field is used to set or display the Vertical position of the selected object in Designer, Trace and the Cut Preview. 

Image Modified
Image Modified

Angle 

PanelpanelIconIdatlassian-infopanelIconbgColor#B3F5FF

:info:

  • This displays the Angle, in degrees, of the Line.

  • The Angle is the space, in degrees, between a given line and an unseen horizontal line intersecting its end point. 

Image Modified

Length 

PanelpanelIconIdatlassian-infopanelIcon:info:bgColor

#B3F5FF

  • Displays the Length of the Line in the current dimensions.

Image Modified

Bevel Type 

PanelpanelIconIdatlassian-infopanelIcon:info:

bgColor#B3F5FF
Expand
titleBevel Type Definition

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

Image Modified
Expand
titleTraced Definition

Tracing the Design provides the Bevel Type and other necessary information to the Vector design in order to either Cut or apply with a Non-Blade Tool on the CMC.

The Set Bevels Tab in Trace contains the tools needed to Trace the design.

Image Modified

See: Tracing the Design

Image Modified

Layer 

PanelpanelIconIdatlassian-infopanelIcon:info:bgColor#B3F5FF

Expand
titleTraced Definition

Tracing the Design provides the Bevel Type and other necessary information to the Vector design in order to either Cut or apply with a Non-Blade Tool on the CMC.

The Set Bevels Tab in Trace contains the tools needed to Trace the design.

Image Modified

See: Tracing the Design

Image Modified