Versions Compared

Old Version 45

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 46

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Deboss Wide Configurations

Info

  • The Blue Deboss Wide Cartridge presses a wide stylus into the matboard to create a subtle design.

  • This is viewed from the front of the mat.

Expand
titleCartridge Definition

A Cartridge is the physical component that holds a Blade, Deboss Stylus, Pen or other application tool.

Select the Deboss Wide Cartridge Type

Expand
title

  • Select the Deboss Tab on the Configurations screen.  

    • Select the Wide-Blue cartridge from the Cartridge dropdown control
    How to Select the Bevel Type to Edit

    Select desired Cartridge Tab. 

    Select the desired Deboss Cartridge Size from Current Bevel Type.

    Edit the desired Configuration field.

    Image Modified

    Select the Area of Concern for Wide Deboss Below:

    • Be sure to select the Deboss Wide from the Current Bevel Type dropdown control.

    Deboss-Wide is Applied to the Wrong Place Horizontally

    Problem:

    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF

    • Deboss-Wide is applied to thewrong place Horizontally.

    Resolution:

    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF
    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF
    Expand
    titleHorizontal Adjustment Definition

    The Horizontal Adjustment defines the global Horizontal placement of objects applied with the Non-Blade Tool Cartridges.

    If the Non-Blade Tool line is applied Too Far Left, Increase the Horizontal Adjustment.

    If the Non-Blade Tool line is applied Too Far Right, Decrease the Horizontal Adjustment.

    Expand
    titleHow to Adjust the Horizontal Adjustment

    When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

    Click OK and do another test cut.

    Continue making adjustments until the desired outcome is achieved.

    Deboss-Wide is Applied to the Wrong Place Vertically 

    Problem:

    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF

    • Deboss-Wide is applied to the wrong place Vertically.

    Resolution:

    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF
    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF
    Expand
    titleVertical Adjustment Definition

    The Vertical Adjustment defines the global Vertical placement of objects applied with the Non-Blade Tool Cartridges.

    If the Non-Blade Tool line is applied Too Far Up, Decrease the Vertical Adjustment.

    If the Non-Blade Tool line is applied Too Far Down, Increase the Vertical Adjustment.

    Expand
    titleHow to Adjust the Vertical Adjustment

    When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

    Click OK and do another test cut.

    Continue making adjustments until the desired outcome is achieved.

    Deboss-Wide is the Wrong Size

    Problem:

    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF

    • Deboss-Wide is the Wrong Size.

    Resolution:

    • Size.

    Resolution:

    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF
    Opening cuts too Large:
    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF
    Expand
    titleOpening Adjustment Definition

    The Opening Adjustment controls the size of the Opening cut or Object applied with non-blade cartridges.

    If the Opening is cut Too Large, Decrease the Opening Adjustment.

    If the Opening is cut Too Small, Increase the Opening Adjustment.

    Expand
    titleHow to Adjust the Opening Adjustment

    When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

    Click OK and do another test cut.

    Continue making adjustments until the desired outcome is achieved.

    Deboss-Wide Applied at the Wrong Depth

    Problem:

    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF

    • Deboss-Wide is applied at the Wrong Depth.

    Resolution:

    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF
    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF
    Expand
    titleDepth Setting Definition

    The Depth Setting controls the Blade Depth for the Non-BladeTools in the Configurations.

    If the Non-BladeTool is too Deep, Decrease the Depth Setting.

    If the Non-BladeTool is too Shallow, Increase the Depth Setting.

    Deboss-Wide Cartridge Tears the Mat 

    Problem:

    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF

    • Deboss-Wide Cartridge Tears the Mat.

    Resolution:

    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF

    • Non-Blade Tool is Tearing in the Corners of the segments:

    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF

    • Non-Blade Tool is Pausing Too Long in the Corners of the segments:

    Expand
    titleCorner Pause Definition

    The Corner Pause setting in Configurations is the amount of time, in milliseconds, to pause the application of the Non-Blade Toolsbetween segments.

    The Non-Blade Tool is Tearing in the Corners of the segments, Increase the Corner Pause. 

    The Non-Blade Tool is Pausing Too Long in the Corners of the segments, Decrease the Corner Pause.  

    Deboss-Wide Lines are too Long

    Problem:

    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF

    • Deboss-Wide Lines are Too Long.

    Resolution:

    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF
    Expand
    titleOvershoot Definition

    The Overshoot controls how far past the end of the Line/Arc Segment to apply the Non-Blade Tool (Deboss, Pen or Vinyl).

    This is similar to the Overcut used with the Blade cartridges.

    If the Overshoot of the Non-Blade Tool is applied Too Long, Decrease the Overshoot.

    If the Overshoot of the Non-Blade Tool is applied Too Short, Increase the Overshoot.

    Expand
    titleHow to Adjust the Overshoot

    When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

    Click OK and do another test cut.

    Continue making adjustments until the desired outcome is achieved.

    Deboss-Wide Lines are too Short 

    Problem:

    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF

    • Deboss-Wide Lines are Too Short.

    Resolution:

    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF
    Expand
    titleOvershoot Definition

    The Overshoot controls how far past the end of the Line/Arc Segment to apply the Non-Blade Tool (Deboss, Pen or Vinyl).

    This is similar to the Overcut used with the Blade cartridges.

    If the Overshoot is applied too Long, Decrease the Overshoot.

    If the Overshoot is applied too Short, Increase the Overshoot.

    Expand
    titleHow to Adjust the Overshoot

    When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

    Click OK and do another test cut.

    Continue making adjustments until the desired outcome is achieved.

    Deboss-Wide Set to Plunge Between Segments

    Problem:

    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF

    • Deboss-Wide Set to Plunge Between Segments.

    Resolution:

    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF

    • Non-Blade Tool leaves a Dot where it plunges:

    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF

    • Non-Blade Tool takes Too Long to apply:

    Expand
    titlePlunge Definition

    The Plunge function controls whether to Plunge/Unplunge between the Line/Arc Segments of an object when applying a Non-Blade Tool.

    The Non-Blade Tool leaves a Dot where it plunges, select Unplunge.

    The Non-Blade Tool takes Too Long to apply, select Plunge.

    Troubleshooting Button 

    Info
    Expand
    titleTroubleshooting Button Definition

    The Troubleshooting Utility allows you to bring in a single opening and automatically selects the correct Cartridge tab and Bevel Type to configure.

    ...