Page Comparison

Templates are specialized parametric shape generators created by Wizard.

Many of the templates have additional Properties that can be edited which can change the shape, curves and corners of the design as well as a wide assortment of Parameters.

The Template Library displays the different templates that are available for use.

The Parameters are a set of specified variable characteristics related to the selected object that can be modified through the accompanying fields in Designer.

For example, the Chamfer is the symmetrical angled surface at the corner of the Template.

In Designer, the Template Parameter Map displays a diagram describing each parameter field for the current Template.

Templates are specialized parametric shape generators created by Wizard.

Many of the templates have additional Properties that can be edited which can change the shape, curves and corners of the design as well as a wide assortment of Parameters.

The Template Library displays the different templates that are available for use.

CutArt™ are simple shapes and design elements created by Wizard.

CutArts can be applied to your current design and resized and rotated. They can be Cut, Debossed, Penned or cut on Vinyl.

• We will add some Alignment Lines that we will use to Mirror the circle.

• You can Mirror the circle without the Alignment Lines, but adding them will help illustrate the process.

The Line tool in Trace will draw a Two-Point Line. 

The Line is defined by two points: the Initial Position and the Terminating Position (which are called “anchors”).

After it is drawn, a third point in the Center is displayed, which can be moved to alter the Line into an Arc.

The Mirror function will create a mirror copy of the selected object along a selected axis in Trace and Visualize.

• The Line is placed.

The Line tool in Trace will draw a Two-Point Line. 

The Line is defined by two points: the Initial Position and the Terminating Position (which are called “anchors”).

After it is drawn, a third point in the Center is displayed, which can be moved to alter the Line into an Arc.

The Line tool in Trace will draw a Two-Point Line. 

The Line is defined by two points: the Initial Position and the Terminating Position (which are called “anchors”).

After it is drawn, a third point in the Center is displayed, which can be moved to alter the Line into an Arc.

The Mirror function will create a mirror copy of the selected object along a selected axis in Trace and Visualize.

The Offset button creates a displacement copy of the selected object a parallel distance away as specified in the Offset Reveal field in Trace.

The Mirror function will create a mirror copy of the selected object along a selected axis in Trace and Visualize.

The Line tool in Trace will draw a Two-Point Line. 

The Line is defined by two points: the Initial Position and the Terminating Position (which are called “anchors”).

After it is drawn, a third point in the Center is displayed, which can be moved to alter the Line into an Arc.

• The Circle as been Mirrored using the Line we drew as the axis.

The Mirror function will create a mirror copy of the selected object along a selected axis in Trace and Visualize.

The Line tool in Trace will draw a Two-Point Line. 

The Line is defined by two points: the Initial Position and the Terminating Position (which are called “anchors”).

After it is drawn, a third point in the Center is displayed, which can be moved to alter the Line into an Arc.

The Mirror function will create a mirror copy of the selected object along a selected axis in Trace and Visualize.

• The Circle has been Mirrored using the Line we drew as the axis.

The Mirror function will create a mirror copy of the selected object along a selected axis in Trace and Visualize.

The Line tool in Trace will draw a Two-Point Line. 

The Line is defined by two points: the Initial Position and the Terminating Position (which are called “anchors”).

After it is drawn, a third point in the Center is displayed, which can be moved to alter the Line into an Arc.

The Mirror function will create a mirror copy of the selected object along a selected axis in Trace and Visualize.

The Line tool in Trace will draw a Two-Point Line. 

The Line is defined by two points: the Initial Position and the Terminating Position (which are called “anchors”).

After it is drawn, a third point in the Center is displayed, which can be moved to alter the Line into an Arc.

• The Circle has been Mirrored all the way around the design.

The Mirror function will create a mirror copy of the selected object along a selected axis in Trace and Visualize.

• Now we want to Break All of the Intersections where all segments in the design intersect with other segments.

The Breaktool is used to Bisect the selected segments at the points where they Intersect in the Trace software.

The Break All Intersections function bisect ALL segments in the design at the points where they intersect with another segment in the Trace software.

• The Intersections are now Broken where the objects crossed over each other.

The Breaktool is used to Bisect the selected segments at the points where they Intersect in the Trace software.

The Break All Intersections function bisect ALL segments in the design at the points where they intersect with another segment in the Trace software.

• We will now Join all of the segments that will make up the opening of the design.

The Join button will connect the selected segments together as one object in Trace. 

The Auto Join Segments button will automatically join adjacent segments together in Trace.

The Arc Tool tool function allows you to draw a three-point mathematically defined curve in the Trace software.

The Arc has three points: the Initial Position and the Terminating Position (which are called "anchors") and one separate Middle point (which is called a "handle") which can be moved to change the shape of the Arc.

The Curvebutton allows you to draw a mathematically defined Bezier/Spline Curve in the Trace software.

The Bezier/Spline Curve is defined by four points: the Initial Position and the Terminating Position (which are called "Anchors") and Two Separate Middle Points (which are called "Handles"), which can be moved to change the shape of the Curve.

The Join button will connect the selected segments together as one object in Trace. 

The Auto Join Segments button will automatically join adjacent segments together in Trace.

The Arc Tool tool function allows you to draw a three-point mathematically defined curve in the Trace software.

The Arc has three points: the Initial Position and the Terminating Position (which are called "anchors") and one separate Middle point (which is called a "handle") which can be moved to change the shape of the Arc.

The Curvebutton allows you to draw a mathematically defined Bezier/Spline Curve in the Trace software.

The Bezier/Spline Curve is defined by four points: the Initial Position and the Terminating Position (which are called "Anchors") and Two Separate Middle Points (which are called "Handles"), which can be moved to change the shape of the Curve.

The Join button will connect the selected segments together as one object in Trace. 

The Auto Join Segments button will automatically join adjacent segments together in Trace.

• Continue selecting the arcs that make up each of the Broken Circles and Joining them until you have Joined each of the outside Arcs.

The Arc Tool tool function allows you to draw a three-point mathematically defined curve in the Trace software.

The Arc has three points: the Initial Position and the Terminating Position (which are called "anchors") and one separate Middle point (which is called a "handle") which can be moved to change the shape of the Arc.

The Curvebutton allows you to draw a mathematically defined Bezier/Spline Curve in the Trace software.

The Bezier/Spline Curve is defined by four points: the Initial Position and the Terminating Position (which are called "Anchors") and Two Separate Middle Points (which are called "Handles"), which can be moved to change the shape of the Curve.

The Join button will connect the selected segments together as one object in Trace. 

The Auto Join Segments button will automatically join adjacent segments together in Trace.

• The Arcs are now one connected entity.

Click Edit > Convert Arc to Splines to convert the Arcs into Bezier Splines. Splines can be Tangified with less distortion, which will give a smoother cutting path for the design in Trace. 

The Tangify function will smooth the connection between the Selected Arc Circuits that are below the specified Angle in the Tangify field to provide a smoother cutting transition between the arcs. 

The Tangify All Circuits will smooth the connection between All of the ArcCircuits that are below the specified Angle in the Tangify field to provide a smoother cutting transition between the arcs. 

• Optionally, you can also bring the CutArt straight to the Cut Preview from Trace.

• The Doily design is completed.

Tracing the Design provides the Bevel Type and other necessary information to the Vector design in order to either Cut or apply a Non-Blade Tool on the CMC.

The Set Bevels Tab in Trace contains the tools needed to Trace the design.

The Bevel Type is the Angle that the blade cuts on the Matboard/Fallout surface when it is not cut at a 90° Right Angle.

CutArt™ are simple shapes and design elements created by Wizard.

CutArts can be applied to your current design and resized and rotated. They can be Cut, Debossed, Penned or cut on Vinyl.

• The new Offset created Arcs that overlap in the corners.

• We want to Break the Intersections in the newly Offset object, rather than all of the Intersections in the design.

The Offset button creates a displacement copy of the selected object a parallel distance away as specified in the Offset Reveal field in Trace.

The Arc Tool tool function allows you to draw a three-point mathematically defined curve in the Trace software.

The Arc has three points: the Initial Position and the Terminating Position (which are called "anchors") and one separate Middle point (which is called a "handle") which can be moved to change the shape of the Arc.

The Breaktool is used to Bisect the selected segments at the points where they Intersect in the Trace software.

The Break All Intersections function bisect ALL segments in the design at the points where they intersect with another segment in the Trace software.

• We will now Join all of the segments that will make up the outside Layer of the design.

The Join button will connect the selected segments together as one object in Trace. 

The Auto Join Segments button will automatically join adjacent segments together in Trace.

• The segments of the outside Layer are now Joined to create one object.

The Join button will connect the selected segments together as one object in Trace. 

The Auto Join Segments button will automatically join adjacent segments together in Trace.

• We could repeat these same steps to add a third Layer using a 1/8" reveal by Offsetting the outside object by .125", Breaking the newly Offset object, then Rejoining the outside elements to create the top Layer.

• Depending upon the Template, the size, the Parameters, etc., you may not need to Breakthe elements before Joining them together if the Offset connects together neatly in the corners.

The Offset button creates a displacement copy of the selected object a parallel distance away as specified in the Offset Reveal field in Trace.

The Breaktool is used to Bisect the selected segments at the points where they Intersect in the Trace software.

The Break All Intersections function bisect ALL segments in the design at the points where they intersect with another segment in the Trace software.

The Join button will connect the selected segments together as one object in Trace. 

The Auto Join Segments button will automatically join adjacent segments together in Trace.

Templates are specialized parametric shape generators created by Wizard.

Many of the templates have additional Properties that can be edited which can change the shape, curves and corners of the design as well as a wide assortment of Parameters.

The Template Library displays the different templates that are available for use.

The Parameters are a set of specified variable characteristics related to the selected object that can be modified through the accompanying fields in Designer.

For example, the Chamfer is the symmetrical angled surface at the corner of the Template.

In Designer, the Template Parameter Map displays a diagram describing each parameter field for the current Template.

• The multi-layered Doily design is completed.

Tracing the Design provides the Bevel Type and other necessary information to the Vector design in order to either Cut or apply a Non-Blade Tool on the CMC.

The Set Bevels Tab in Trace contains the tools needed to Trace the design.

The Bevel Type is the Angle that the blade cuts on the Matboard/Fallout surface when it is not cut at a 90° Right Angle.

CutArt™ are simple shapes and design elements created by Wizard.

CutArts can be applied to your current design and resized and rotated. They can be Cut, Debossed, Penned or cut on Vinyl.