Cartridges Involved | |
---|---|
This Configuration element involves the following Cartridges. Note: Not all cartridges are available for all CMC models. |
...
Select the Deboss Wide Cartridge Type | |||
---|---|---|---|
|
Select the Area of Concern for Wide Deboss Below:
|
---|
Deboss-Wide is Applied to the Wrong Place Horizontally | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Problem:
Resolution:
|
Deboss-Wide is Applied to the Wrong Place Vertically | ||
---|---|---|
Problem:
Expand | | |
|
Expand | ||
---|---|---|
| ||
The Vertical Adjustment defines the global Vertical placement of objects applied with the Non-Blade Tool Cartridges. |
Deboss-Wide is the Wrong Size | ||
---|---|---|
Problem:
Expand | | Opening Adjustment Definition |
The Opening Adjustment controls the size of the opening. |
Expand | ||
---|---|---|
| ||
The Opening Adjustment controls the size of the object cut or applied with non-blade cartridges. |
Deboss-Wide Applied at the Wrong Depth | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Problem:
Resolution:Cut too shallow, increaseResolution:
|
Deboss-Wide Cartridge Tears the Mat | |||||||
---|---|---|---|---|---|---|---|
Problem:
Resolution:
Resolution:Increase the Corner Pause.
|
Deboss-Wide Lines are too Long | |||||||
---|---|---|---|---|---|---|---|
Problem:
Resolution:
Resolution:
|
Deboss-Wide Lines are too Short | |||||||
---|---|---|---|---|---|---|---|
Problem:
Resolution:
Resolution:Increase the Overshoot.
|
Deboss-Wide Set to Plunge Between Segments | |||||||
---|---|---|---|---|---|---|---|
Problem:
Resolution:
Resolution:Select Plunge to plunge the Deboss between Segments.
|
Troubleshooting Button | |||
---|---|---|---|
|
...