Blade Depth ButtonUse the Blade Depth button to open the Blade Depth screen where the user can select the blade depth for the current design. | |
|---|---|
Blade Depth Click the Blade Depth Button to open the Blade Depth screen which allows the user to set the blade depth for the current design. |  |
...
Set As Default | |
|---|---|
Click Set As Default button to set the current Blade Depth value as the Default Blade Depth for the associated Opening or V-Groove field. |  |
Set the Default for the Blade Depth | |
|---|---|
The default setting for the Blade Depth can be set in the Admin > Cutting section. This also sets the values for the preset Blade Depth Quick Select Entries. |  |
...
Returning to the Editor After Changing the Blade Depth | |
|---|---|
Changing the blade depth for a layer on the Cutting Preview then returning to the Editor will reload the Default Blade Depth or the selected SKU’s blade depth when you go back to the Cutting Preview. You will need to reselect the Blade Depth if it should be something other than the Default Blade Depth or the selected SKU’s blade depth. |  |
Blade Depth Prompt CMC 8000, 9000 and 9000z | |
|---|---|
After selecting the desired blade depth for the current layer and Aligning the Head if necessary, Click Cut to cut the mat. If the current layer uses a different blade cartridge or requires a different Blade Depth than the last layer cut, the user will be prompted to change the Cartridge and/or the Blade Depth. |  |
Replace the current Cartridge with the one requested on the Blade Depth Prompt. |  |
Change the Blade Depth Dial on the Head to the requested depth. Click OK to cut. |  |