45 Degree Outside | |
|---|---|
The 45 Degree Cartridge cuts the outside with a 45° bevel. |  |
Select the 45 Degree Outside Bevel Type | |
|---|---|
Select the 45° Tab on the Configurations screen. Select the specific Outside bevel type from the Current Bevel Type dropdown control:
|  |
Select the Area of Concern for the 45 Degree Outside Cut Below: |
|---|
45 Degree Outside Cuts the Wrong Depth When Using a SKU | |
|---|---|
Select this topic to adjust the Depth Bias. |  |
...
45 Degree Outside Exterior Backup is too Long | |
|---|---|
This is viewed from the front of the mat. Select this topic to adjust the Exterior Backup. |   |
45 Degree Outside Exterior Backup is too Short | |
|---|---|
This is viewed from the front of the mat. Select this topic to adjust the Exterior Backup. |   |
45 Degree Outside Exterior Overcut is too Long | |
|---|---|
This is viewed from the front of the mat. Select this topic to adjust the Exterior Overcut. |  |
45 Degree Outside Exterior Overcut is too Short | |
|---|---|
This is viewed from the front of the mat. Select this topic to adjust the Exterior Overcut. |   |
45 Degree Outside Interior Backup is too Long | |
|---|---|
This is viewed from the front of the mat. Select this topic to adjust the Interior Backup. |   |
45 Degree Outside Interior Backup is too Short | |
|---|---|
This is viewed from the front of the mat. Select this topic to adjust the Interior Backup. |   |
45 Degree Outside Interior Overcut is too Long | |
|---|---|
This is viewed from the front of the mat. Select this topic to adjust the Interior Overcut. |   |
45 Degree Outside Interior Overcut is too Short | |
|---|---|
This is viewed from the front of the mat. Select this topic to adjust the Interior Overcut. |   |
45 Degree Outside Cuts the Wrong Size | |
|---|---|
This is viewed from the front of the mat. Select this topic to adjust the Opening Adjustment. |  |
...