Page Comparison

Versions Compared

Key

This line was added.
This line was removed.
Formatting was changed.

45 Degree Outside
The 45 Degree Cartridge cuts the outside with a 45° bevel.

Image Removed

Image Added

Select the 45 Degree Outside Bevel Type

Select the 45° Tab on the Configurations screen.

Select the specific Outside bevel type from the Current Bevel Type dropdown control:

Outside
Outside-Front of Mat

Image Removed

Image Added

Select the Area of Concern for the 45 Degree Outside Cut Below:

45 Degree Outside Cuts the Wrong Depth When Using a SKU
Select this topic to adjust the Depth Bias.	Image Modified

45 Degree Outside Does Not Pause for Blade Change when Cutting
Select this topic to adjust the Plunge Count.	Image Modified

45 Degree Circle/Oval Outside Rotation Adjustments Using the Circle/Oval Rotation Utility
Select this topic to access the Circle/Oval Rotation Utility to adjust the oval rotation for different size ovals.	Image Modified

45 Degree Outside Exterior Backup is too Long
This is viewed from the front of the mat. Select this topic to adjust the Exterior Backup.	Image Modified

45 Degree Outside Exterior Backup is too Short
This is viewed from the front of the mat. Select this topic to adjust the Exterior Backup.	Image Modified

45 Degree Outside Exterior Overcut is too Long
This is viewed from the front of the mat. Select this topic to adjust the Exterior Overcut.	Image Modified

45 Degree Outside Exterior Overcut is too Short
This is viewed from the front of the mat. Select this topic to adjust the Exterior Overcut.	Image Modified

45 Degree Outside Interior Backup is too Long
This is viewed from the front of the mat. Select this topic to adjust the Interior Backup.	Image Modified

45 Degree Outside Interior Backup is too Short
This is viewed from the front of the mat. Select this topic to adjust the Interior Backup.	Image Modified

45 Degree Outside Interior Overcut is too Long
This is viewed from the front of the mat. Select this topic to adjust the Interior Overcut.	Image Modified

45 Degree Outside Interior Overcut is too Short
This is viewed from the front of the mat. Select this topic to adjust the Interior Overcut.	Image Modified

45 Degree Outside Cuts the Wrong Size
This is viewed from the front of the mat. Select this topic to adjust the Opening Adjustment.	Image Modified

45 Degree Outside has a Swoop
This is viewed from the front of the mat. Select this topic to adjust the Rotation.	Image Modified

45 Degree Outside has a Flare
This is viewed from the front of the mat. Select this topic to adjust the Rotation.	Image Modified

45 Degree Oval Outside has a Bump
This is viewed from the front of the mat. Select this topic to adjust the Oval Rotation.	Image Modified

45 Degree Oval Outside has a Feather
This is viewed from the front of the mat. Select this topic to adjust the Oval Rotation.	Image Modified

Troubleshooting Button
Use the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview.	Image Modified