Page Comparison

Bring the design into Trace via the Right-Click Menu* or from the Cut Preview Screen.

*If you use the rightRight-click Click method, hold down the CTRL key and select the opening and the CutArt before selecting Convert to CutArt. 

Click the Edit radio button.

Hold down the CTRL key and click on each segment making up the upper left-hand inner quadrant, highlighted in red. 

Zoom In if it makes it easier to select the lines.

Click the Join button.

The segments are joined together to create a single object, highlighted in red.

Now we’ll do the outside quadrant.

Hold down the CTRL key and click on each segment making up the upper left-hand outer quadrant, highlighted in red.

Click the Join button.

The segments are joined together to create a single object, highlighted in red.

Hold down the CTRL key and click on the interior and exterior of our new corner to select them.

Click on the Mirror button.

Now we will draw the line that we will mirror the selected objects along. Right-click on the top of the vertical line.

Move the cursor and Right-click on the bottom of the vertical line. 

Click the Dynamic Outsides button if you don't see all of the design.

The corner will be mirrored horizontally. 

Now we’ll mirror it vertically.

Hold down the CTRL key and click on the interior and exterior of both of the upper corners to select them.

Click on the Mirror button.

Now we will draw the line that we will mirror the selected objects along. Right-click on the left of the horizontal line.

Move the cursor and Right-click on the right of the horizontal line. 

The corners will be mirrored vertically.