This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw


Edit Section: FrameShop Trace Editor

Edit

Edit

The Edit section contains all of the necessary tools for editing the design. Click the Radio button next to Edit to activate the Edit section.

NOTE: Hit F6 to toggle between the Draw and Edit sections. 

Mirror 

Select this topic to see information on the Mirror tool which flips the current object along a selected line of reference.

Join Segments 

Select this topic to see information on the Join Segments tool which Joins several segments together.

Close Circuit 

Select this topic to see information on the Close Circuit tool which Closes the remaining segment of an object to complete the circuit.

Merge Circuits 

Select this topic to see information on the Merge Circuits tool which Combines overlapped objects into a single object.

Break Intersections 

Select this topic to see information on the Break Intersections tool which Breaks a segment where it intersects with another segment.

Explode Circuit 

Select this topic to see information on the Explode Circuit tool which Breaks an object into the individual segments that make up the object.

Flip 

Select this topic to see information on the Flip tool which Turns the object over, horizontally or vertically.

Offset 

Select this topic to see information on the Offset tool which Creates a displacement copy of the selected object a parallel distance away.

Rotate 

Select this topic to see information on the Rotate tool which Moves the object around an axis or center, a specified number of degrees.

Tangify 

Select this topic to see information on the Tangify tool which Smooths the connection between circuits that are below a specified angle.

Move an Object 

Select this topic to see information on how to Move an Object.

Move a Point 

Select this topic to see information on how to Move a Point.