">
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 7 Current »

Blade Cartridge Selection: Single Tab

  • Click on the Blade Cartridge Icon. 

  • Select the desired Blade Cartridge for this layer.  

45 Degree Normal Bevel Opening

  • The 45° Normal Bevel Opening is created by cutting into the matboard surface with the blade angled at 45°, thereby slanting the bevel away from the matboard surface, displaying the matboard core from the front.

    • The 45° Blade Cartridge does not support Blade Depths above 16.

45MetalBevelOpeningCartridge70800.png

Full Definition: 45 Degree Normal Bevel Opening Definition

52 Degree Normal Bevel Opening

  • The 52° Normal Bevel Opening is created by cutting into the matboard surface with the blade angled at 52°, thereby slanting the bevel away from the matboard surface, displaying the matboard core from the front.

52BevelOpeningCartridges70800.png

Full Definition: 52 Degree Normal Bevel Opening Definition

90 Degree Bevel Opening

  • The 90° Bevel Opening is created by cutting a 90° Right Angle into the matboard.

  • The matboard core is hidden from view since there is no Bevel when cutting at a 90° Right Angle.

90BevelOpeningCartridge70800.png

Full Definition: 90 Degree Bevel Opening Definition

Cartridges Available Only Under Specific Conditions
  • No labels