Outside Oval Rotation for Oval V-Grooves
A Feather on the Outside Cut of an Oval V-Groove is a Fringe of material left behind where the cut started and ended. If the Outside cut of the Oval V-Groove cuts with a Feather, Increase the Outside Oval Rotation. The Outside Oval Rotation for V-Grooves controls for Feathers or Bumps on the Outside Cut of an Oval V-Groove. Feather in the Outside Cut of the V-Groove Outside Oval Rotation for V-Grooves
A Bump on the Outside Cut of an Oval V-Groove is a Lump of material left behind where the cut started and ended. If the Outside cut of the Oval V-Groove cuts with a Bump, Decrease the Outside Oval Rotation. The Outside Oval Rotation for V-Grooves controls for Feathers or Bumps on the Outside Cut of an Oval V-Groove. When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |