Select whether to Cut the Outside with this toggle selection for the CMC Z1 and Z (9000z). Optionally, you could select the Cut Outside from the Outside Cut toggle.

Click the Set Advanced Options button to access the Advanced Outside Options. 

Select the desired Outside Cut setting from the Enable Cut Outside toggle.  

Click OK.

The CMC will cut the outside of the mat with the selected setting.

Click the Enable Outside Cut to On to cut the outside of the mat.

Click the Set Advanced Options button on the Cut Preview to access the Advanced Outside Options. 

Select the Enable Cut Outside toggle to On.  

Click OK.

The CMC will now cut the outside of the mat.

Click the Enable Outside Cut to Off to not cut the outside of the mat.

Click the Set Advanced Options button on the Cut Preview to access the Advanced Outside Options. 

Select the Enable Cut Outside toggle to Off.  

Click OK.

The CMC will now not cut the outside of the mat.

Cut the Outside Toggle

Optionally, select this topic to see information on the Cut the Outside Toggle.

The default setting for Cutting the Outside can be set in the Admin > Editor section.

The default setting for 90 Degree Outside can be set in the Admin > Cutting section.