45 Degree Plus Cartridge Configurations

Cartridges Involved
This Configuration element involves the following Cartridges. Note: Not all cartridges are available for all CMC models.

45 Degree Plus Cartridge Configurations
The 45 Degree Plus Cartridge cuts a 45° bevel into thicker matboard such as 8-ply. Older systems may have a yellow plastic 45°+ Cartridge. Cartridge Definition A Cartridge is the physical component that holds a Blade, Deboss Stylus, Pen or other application tool.

Select the 45 Degree Plus Cartridge Bevel Type
Select the 45°+ Tab on the Configurations screen. Select the desired Bevel Type from the Current Bevel Type dropdown control. Select the cut type from the list below. Bevel Type Definition The Bevel Type is the Angle that the blade cuts on the Matboard/Fallout surface when it is not cut at a 90° Right Angle.

45 Degree Plus Opening Configurations
The 45 Degree Plus Opening includes the following bevel types: Normal Bevel Reverse Bevel Normal Bevel-Front of Mat Reverse Bevel-Front of Mat

45 Degree Plus Drop Configurations
The 45 Degree Plus Drop includes the following bevel types: Normal Drop Reverse Drop Normal Drop-Front of Mat Reverse Drop-Front of Mat

45 Degree Plus Outside Configurations
The 45 Degree Plus Outside includes the following bevel types: Outside Outside-Front of Mat

45 Degree Plus V-Groove Configurations
The 45 Degree Plus V-Groove includes the following bevel types: V-Groove

Troubleshooting Button
Select this topic to see information on the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview. Troubleshooting Button Definition The Troubleshooting Utility allows you to bring in a single opening and automatically selects the correct Cartridge tab and Bevel Type to configure.

Search