">
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 20 Next »

Cartridges Involved

This Configuration element involves the following Cartridges.

Note: Not all cartridges are available for all CMC models.

45 Degree Plus Cartridge Configurations

  • The 45 Degree Plus Cartridge cuts a 45° bevel into thicker matboard such as 8-ply. 

  • Older systems may have a yellow plastic 45°+ Cartridge.

Select the 45 Degree Plus Cartridge Bevel Type

  • Select the 45°+ Tab on the Configurations screen.

  • Select the desired Bevel Type from the Current Bevel Type dropdown control.

  • Select the cut type from the list below.

45 Degree Plus Opening Configurations

The 45 Degree Plus Opening includes the following bevel types:

  • Normal Bevel

  • Reverse Bevel

  • Normal Bevel-Front of Mat

  • Reverse Bevel-Front of Mat

45 Degree Plus Drop Configurations

The 45 Degree Plus Drop includes the following bevel types:

  • Normal Drop

  • Reverse Drop

  • Normal Drop-Front of Mat

  • Reverse Drop-Front of Mat

45 Degree Plus Outside Configurations

The 45 Degree Plus Outside includes the following bevel types:

  • Outside

  • Outside-Front of Mat

45 Degree Plus V-Groove Configurations

The 45 Degree Plus V-Groove includes the following bevel types:

  • V-Groove

Troubleshooting Button

Select this topic to see information on the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview.

  • No labels