Click here to check out our new How To section

Dense Material: Cutting Default Setting

Owned by dani.simmonds

Last updated: about 3 hours ago

2 min read

Dense Material: Cutting Default Setting

Dense Material: Cutting Default Setting
Select the cutting speed percentage from the Default Speed % to be used when cutting Dense Material. For example, selecting 50% will make the CMC cut at 50% of the full speed when cutting with the Dense Material setting. Set the desired cut speed percentage to be used for cutting Dense Material in the Default Speed % field.	Default Settings for the Speed to Cut Dense Material

Related Links	Default Settings

Related Links

Default Settings